B |
|
| bend | A feature joining two walls |
| bend extremity | Axial relimitation for a straight bend |
C |
|
| corner relief | A feature created at the intersection of several bends or of a bend and a wall allowing to remove matter so that the part can fold/unfold without overlapping. |
| cutout | A feature corresponding to an opening through
a feature. The shape of the opening corresponds to the extrusion of a profile. |
E |
|
| extrusion | A feature created by extruding a profile and adding thickness |
F |
|
| flange | A feature created by sweeping a profile along
a spine. The different flanges or swept walls available are: simple and swept flange, hem and tear drop. |
P |
|
| pattern | A set of similar features repeated in the same feature or part |
| profile | An open or closed profile including arcs and lines created by the Profile command in the Sketcher workbench |
R |
|
| reference wall | The first created wall; when unfolding the part, it is the fixed wall. |
S |
|
| stamping | A feature created by embossing sheet metal. The different stampings available are: point/circular, extruded/flanged hole, flanged cutout, curve, surface, bridge, louver and stiffening rib. |
W |
|
| wall | A feature created by adding thickness to a profile |
