B |
 |
|
| bend | A feature joining two walls | |
| bend extremity | Axial relimitation for a straight bend | |
C |
|
|
| cutout | A feature corresponding to an opening through a feature. The shape of the opening corresponds to the extrusion of a profile. |
|
E |
|
|
| extrusion | A feature created by extruding a profile and adding thickness | |
F |
|
|
| flange | A feature created by sweeping a profile along a spine. The different flanges or swept walls available are: simple and swept flange, hem and tear drop. |
|
P |
|
|
| pattern | A set of similar features repeated in the same feature or part | |
| profile | An open or closed profile including arcs and lines created by the Profile command in the Sketcher workbench | |
R |
|
|
| reference wall | The first created wall; when unfolding the part, it is the fixed wall. | |
S |
|
|
| stamping | A feature created by embossing sheet metal. The different stampings available are: point, extruded hole, curve, surface, bridge, louver and stiffening rib. |
|
W |
|
|
| wall | A feature created by adding thickness to a profile |