Insert Resources
All supported Insert resources are presented in this section:
MfgRoundInsert (Round Insert)
Description
Describes the MfgRoundInsert resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT
(Comment)
Type: String
Associates a comment to the resource. |
MFG_DESC_CODE
(Description code)
Type:
String
Possible values:
ANSI
ISO
NoCode
Defines the Description code: ISO or ANSI. The manufacturing attribute is
MFG_DESC_CODE. |
Geometry Attributes
These attributes characterize the insert shape and have an impact on the
tool path computation.
MFG_NOSE_RADIUS
(Nose radius : r)
Type:
Real
Specifies the nose radius of the insert. The manufacturing attribute is
MFG_NOSE_RADIUS. |
MFG_INSERT_THICK
(Thickness)
Type:
Real
Specifies the thickness of the insert. The manufacturing attribute is
MFG_INSERT_THICK. |
MFG_CLEAR_ANGLE
(Clearance angle)
Type:
Real
Defines the clearance angle. The manufacturing attribute is
MFG_CLEAR_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on the
tool path computation.
MFG_MACH_QUALITY
(Machining quality)
Type:
String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing mode. The
manufacturing attribute is MFG_MACH_QUALITY with possible value ROUGH,
FINISH or EITHER. |
MFG_INSERT_MAT
(Material)
Type:
String
Possible values:
COATED_CARBIDE (Coated carbide)
CERMETS (Cermets)
CERAMICS (Ceramics)
CUBIDE_BORON_NITRIDE (Cubide Boron Nitride)
OTHER (Other)
Specifies the material of the insert. The manufacturing attribute is
MFG_INSERT_MAT. |
MFG_LIFE_TIME (Life
time)
Type: Real
Specifies the life time of the insert. The manufacturing attribute is
MFG_LIFE_TIME. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC_FINISH
(Finishing cutting speed)
Type: Real
Defines the Finishing cutting speed of the tool. The manufacturing
attribute is MFG_VC_FINISH. |
MFG_SZ_FINISH
(Finishing feedrate per tooth)
Type: Real
Defines the Finishing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_FINISH. |
MFG_VC_ROUGH
(Roughing cutting speed)
Type: Real
Defines the Roughing cutting speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH. |
MFG_SZ_ROUGH
(Roughing feedrate per tooth)
Type: Real
Defines the Roughing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_ROUGH. |
MfgGrooveInsert (Groove Insert)
Description
Describes the MfgGrooveInsert resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT
(Comment)
Type:
String
Associates a comment to the resource. |
MFG_GROOVE_TYPE
(Type)
Type:
String
Possible values:
CUTOFF (Cut Off)
GROOVE (Groove)
Specifies the grooving capability of the insert. The manufacturing
attribute is MFG_GROOVE_TYPE. |
Geometry Attributes
These attributes characterize the insert shape and have an impact on the
tool path computation.
MFG_INSERT_HEIGH
(Height : l)
Type:
Real
Specifies the height of the insert. The manufacturing attribute is
MFG_INSERT_HEIGH. |
MFG_INSERT_WIDTH
(Insert width : la)
Type:
Real
Defines the insert width. The manufacturing attribute is MFG_INSERT_WIDTH.
|
MFG_BOTTOM_ANGLE
(Bottom angle)
Type:
Real
Specifies the bottom angle of the insert. The manufacturing attribute is
MFG_BOTTOM_ANGLE. |
MFG_FLANK_ANG_1
(Left flank angle)
Type:
Real
Specifies the left flank angle of the insert. The manufacturing attribute
is MFG_FLANK_ANG_1. |
MFG_FLANK_ANG_2
(Right flank angle)
Type:
Real
Specifies the right flank angle of the insert. The manufacturing
attribute is MFG_FLANK_ANG_2. |
MFG_NOSE_RAD_1
(Left nose radius : r1)
Type:
Real
Specifies the left nose radius of the insert. The manufacturing attribute
is MFG_NOSE_RAD_1. |
MFG_NOSE_RAD_2
(Right nose radius : r2)
Type:
Real
Specifies the right nose radius of the insert. The manufacturing
attribute is MFG_NOSE_RAD_2. |
MFG_INSERT_THICK
(Thickness)
Type:
Real
Specifies the thickness of the insert. The manufacturing attribute is
MFG_INSERT_THICK. |
MFG_CLEAR_ANGLE
(Clearance angle)
Type:
Real
Defines the clearance angle. The manufacturing attribute is
MFG_CLEAR_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on the
tool path computation.
MFG_MACH_QUALITY
(Machining quality)
Type:
String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing mode. The
manufacturing attribute is MFG_MACH_QUALITY with possible value ROUGH,
FINISH or EITHER. |
MFG_INSERT_MAT
(Material)
Type:
String
Possible values:
COATED_CARBIDE (Coated carbide)
CERMETS (Cermets)
CERAMICS (Ceramics)
CUBIDE_BORON_NITRIDE (Cubide Boron Nitride)
OTHER (Other)
Specifies the material of the insert. The manufacturing attribute is
MFG_INSERT_MAT. |
MFG_CUT_LENGTH
(Cutting length : Lc)
Type:
Real
Defines the effective cutting length available on the tool's active part.
The manufacturing attribute is MFG_CUT_LENGTH. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC_FINISH
(Finishing cutting speed)
Type:
Real
Defines the Finishing cutting speed of the tool. The manufacturing
attribute is MFG_VC_FINISH. |
MFG_SZ_FINISH
(Finishing feedrate per tooth)
Type:
Real
Defines the Finishing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_FINISH. |
MFG_VC_ROUGH
(Roughing cutting speed)
Type: Real
Defines the Roughing cutting speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH. |
MFG_SZ_ROUGH
(Roughing feedrate per tooth)
Type: Real
Defines the Roughing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_ROUGH. |
MfgThreadInsert (Thread Insert)
Description
Describes the MfgThreadInsert resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT
(Comment)
Type:
String
Associates a comment to the resource. |
MFG_MACH_TYPE
(Machining type)
Type:
String
Possible values:
MfgExternal
MfgInternal
Specifies internal or external machining type. The manufacturing
attribute is MFG_MACH_TYPE. |
Geometry Attributes
These attributes characterize the insert shape and have an impact on the
tool path computation.
MFG_THREAD_PROF
(Thread profile)
Type:
String
Possible values:
MfgTrapezoidal
MfgISO
MfgUNC
MfgGaz
OTHER (Other)
Specifies the thread profile of the insert. The manufacturing attribute
is MFG_THREAD_PROF. |
MFG_THREAD_DEF
(Thread definition)
Type:
String
Possible values:
MfgPitch
MfgThreadPerInch
Specifies the thread definition of the insert. The manufacturing
attribute is MFG_THREAD_DEF. |
MFG_PITCH_OF_THREAD
(Pitch of thread)
Type:
Real
Describes the thread pitch. The manufacturing attribute is
MFG_PITCH_OF_THREAD. |
MFG_PITCH_NUMBER
(Pitch)
Type:
Real
Specifies the pitch number of the insert. The manufacturing attribute is
MFG_PITCH_NUMBER. |
MFG_INSERT_LGTH
(Insert length : l)
Type:
Real
Defines the cutting edge length of an insert. The manufacturing attribute
is MFG_INSERT_LGTH. |
MFG_THREAD_ANGLE
(Thread angle)
Type:
Real
Specifies the thread angle of the insert. The manufacturing attribute is
MFG_THREAD_ANGLE. |
MFG_HAND_STYLE
(Hand style)
Type:
String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
NEUTRAL
Defines the tool's hand style. The manufacturing attribute is
MFG_HAND_STYLE with possible value RIGHT_HAND, LEFT_HAND or NEUTRAL. |
MFG_TOOTH_X (Tooth
X)
Type: Real
Specifies the X position of end of the insert tooth. The manufacturing
attribute is MFG_TOOTH_X. |
MFG_TOOTH_Z (Tooth
Z)
Type: Real
Specifies the Z position of end of the insert tooth. The manufacturing
attribute is MFG_TOOTH_Z. |
MFG_TOOTH_H (Tooth
Y)
Type: Real
Specifies the height of the insert tooth. The manufacturing attribute is
MFG_TOOTH_H. |
MFG_NOSE_RADIUS
(Nose radius : r)
Type:
Real
Specifies the nose radius of the insert. The manufacturing attribute is
MFG_NOSE_RADIUS. |
MFG_INSERT_THICK
(Thickness)
Type:
Real
Specifies the thickness of the insert. The manufacturing attribute is
MFG_INSERT_THICK. |
Technology Attributes
These attributes provide technological information without any impact on the
tool path computation.
MFG_MACH_QUALITY
(Machining quality)
Type:
String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing mode. The
manufacturing attribute is MFG_MACH_QUALITY with possible value ROUGH,
FINISH or EITHER. |
MFG_INSERT_MAT
(Material)
Type:
String
Possible values:
COATED_CARBIDE (Coated carbide)
CERMETS (Cermets)
CERAMICS (Ceramics)
CUBIDE_BORON_NITRIDE (Cubide Boron Nitride)
OTHER (Other)
Specifies the material of the insert. The manufacturing attribute is
MFG_INSERT_MAT. |
MFG_LIFE_TIME (Life
time)
Type:
Real
Specifies the life time of the insert. The manufacturing attribute is
MFG_LIFE_TIME. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC_FINISH
(Finishing cutting speed)
Type:
Real
Defines the Finishing cutting speed of the tool. The manufacturing
attribute is MFG_VC_FINISH. |
MFG_SZ_FINISH
(Finishing feedrate per tooth)
Type:
Real
Defines the Finishing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_FINISH. |
MFG_VC_ROUGH
(Roughing cutting speed)
Type: Real
Defines the Roughing cutting speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH. |
MFG_SZ_ROUGH
(Roughing feedrate per tooth)
Type: Real
Defines the Roughing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_ROUGH. |
MfgDiamondInsert (Diamond Insert)
Description
Describes the MfgDiamondInsert resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT
(Comment)
Type:
String
Associates a comment to the resource. |
MFG_DESC_CODE
(Description code)
Type:
String
Possible values:
ANSI
ISO
NoCode
Defines the Description code: ISO or ANSI. The manufacturing attribute is
MFG_DESC_CODE. |
Geometry Attributes
These attributes characterize the insert shape and have an impact on the
tool path computation.
MFG_NOSE_RADIUS
(Nose radius : r)
Type:
Real
Specifies the nose radius of the insert. The manufacturing attribute is
MFG_NOSE_RADIUS. |
MFG_INSERT_ANGLE
(Insert angle : a)
Type:
Real
Defines the angle of the insert mounted on the tool. The manufacturing
attribute is MFG_INSERT_ANGLE. |
MFG_INSERT_LGTH
(Insert length : l)
Type:
Real
Defines the cutting edge length of an insert. The manufacturing attribute
is MFG_INSERT_LGTH. |
MFG_INSCRIB_DIAM
(Inscribed diameter : iC)
Type:
Real
Specifies the diameter of the inscribed circle of the insert. The
manufacturing attribute is MFG_INSCRIB_DIAM. |
MFG_INSERT_THICK
(Thickness)
Type:
Real
Specifies the thickness of the insert. The manufacturing attribute is
MFG_INSERT_THICK. |
MFG_CLEAR_ANGLE
(Clearance angle)
Type:
Real
Defines the clearance angle. The manufacturing attribute is
MFG_CLEAR_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on the
tool path computation.
MFG_MACH_QUALITY
(Machining quality)
Type:
String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing mode. The
manufacturing attribute is MFG_MACH_QUALITY with possible value ROUGH,
FINISH or EITHER. |
MFG_INSERT_MAT
(Material)
Type:
String
Possible values:
COATED_CARBIDE (Coated carbide)
CERMETS (Cermets)
CERAMICS (Ceramics)
CUBIDE_BORON_NITRIDE (Cubide Boron Nitride)
OTHER (Other)
Specifies the material of the insert. The manufacturing attribute is
MFG_INSERT_MAT. |
MFG_LIFE_TIME (Life
time)
Type:
Real
Specifies the life time of the insert. The manufacturing attribute is
MFG_LIFE_TIME. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC_FINISH
(Finishing cutting speed)
Type:
Real
Defines the Finishing cutting speed of the tool. The manufacturing
attribute is MFG_VC_FINISH. |
MFG_SZ_FINISH
(Finishing feedrate per tooth)
Type:
Real
Defines the Finishing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_FINISH. |
MFG_VC_ROUGH
(Roughing cutting speed)
Type:
Real
Defines the Roughing cutting speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH. |
MFG_SZ_ROUGH
(Roughing feedrate per tooth)
Type:
Real
Defines the Roughing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_ROUGH. |
MfgSquareInsert (Square Insert)
Description
Describes the MfgSquareInsert resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT
(Comment)
Type:
String
Associates a comment to the resource. |
MFG_DESC_CODE
(Description code)
Type:
String
Possible values:
ANSI
ISO
NoCode
Defines the Description code: ISO or ANSI. The manufacturing attribute is
MFG_DESC_CODE. |
Geometry Attributes
These attributes characterize the insert shape and have an impact on the
tool path computation.
MFG_NOSE_RADIUS
(Nose radius : r)
Type:
Real
Specifies the nose radius of the insert. The manufacturing attribute is
MFG_NOSE_RADIUS. |
MFG_INSERT_LGTH
(Insert length : l)
Type:
Real
Defines the cutting edge length of an insert. The manufacturing attribute
is MFG_INSERT_LGTH. |
MFG_INSCRIB_DIAM
(Inscribed diameter : iC)
Type:
Real
Specifies the diameter of the inscribed circle of the insert. The
manufacturing attribute is MFG_INSCRIB_DIAM. |
MFG_INSERT_THICK
(Thickness)
Type:
Real
Specifies the thickness of the insert. The manufacturing attribute is
MFG_INSERT_THICK. |
MFG_CLEAR_ANGLE
(Clearance angle)
Type:
Real
Defines the clearance angle. The manufacturing attribute is
MFG_CLEAR_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on the
tool path computation.
MFG_MACH_QUALITY
(Machining quality)
Type:
String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing mode. The
manufacturing attribute is MFG_MACH_QUALITY with possible value ROUGH,
FINISH or EITHER. |
MFG_INSERT_MAT
(Material)
Type:
String
Possible values:
COATED_CARBIDE (Coated carbide)
CERMETS (Cermets)
CERAMICS (Ceramics)
CUBIDE_BORON_NITRIDE (Cubide Boron Nitride)
OTHER (Other)
Specifies the material of the insert. The manufacturing attribute is
MFG_INSERT_MAT. |
MFG_LIFE_TIME (Life
time)
Type:
Real
Specifies the life time of the insert. The manufacturing attribute is
MFG_LIFE_TIME. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC_FINISH
(Finishing cutting speed)
Type:
Real
Defines the Finishing cutting speed of the tool. The manufacturing
attribute is MFG_VC_FINISH. |
MFG_SZ_FINISH
(Finishing feedrate per tooth)
Type:
Real
Defines the Finishing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_FINISH. |
MFG_VC_ROUGH
(Roughing cutting speed)
Type: Real
Defines the Roughing cutting speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH. |
MFG_SZ_ROUGH
(Roughing feedrate per tooth)
Type: Real
Defines the Roughing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_ROUGH. |
MfgTriangularInsert (Triangular Insert)
Description
Describes the MfgTriangularInsert resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT
(Comment)
Type:
String
Associates a comment to the resource. |
MFG_DESC_CODE
(Description code)
Type:
String
Possible values:
ANSI
ISO
NoCode
Defines the Description code: ISO or ANSI. The manufacturing attribute is
MFG_DESC_CODE. |
Geometry Attributes
These attributes characterize the insert shape and have an impact on the
tool path computation.
MFG_NOSE_RADIUS
(Nose radius : r)
Type:
Real
Specifies the nose radius of the insert. The manufacturing attribute is
MFG_NOSE_RADIUS. |
MFG_INSERT_LGTH
(Insert length : l)
Type:
Real
Defines the cutting edge length of an insert. The manufacturing attribute
is MFG_INSERT_LGTH. |
MFG_INSCRIB_DIAM
(Inscribed diameter : iC)
Type:
Real
Specifies the diameter of the inscribed circle of the insert. The
manufacturing attribute is MFG_INSCRIB_DIAM. |
MFG_INSERT_THICK
(Thickness)
Type:
Real
Specifies the thickness of the insert. The manufacturing attribute is
MFG_INSERT_THICK. |
MFG_CLEAR_ANGLE
(Clearance angle)
Type:
Real
Defines the clearance angle. The manufacturing attribute is
MFG_CLEAR_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on the
tool path computation.
MFG_MACH_QUALITY
(Machining quality)
Type:
String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing mode. The
manufacturing attribute is MFG_MACH_QUALITY with possible value ROUGH,
FINISH or EITHER. |
MFG_INSERT_MAT
(Material)
Type:
String
Possible values:
COATED_CARBIDE (Coated carbide)
CERMETS (Cermets)
CERAMICS (Ceramics)
CUBIDE_BORON_NITRIDE (Cubide Boron Nitride)
OTHER (Other)
Specifies the material of the insert. The manufacturing attribute is
MFG_INSERT_MAT. |
MFG_LIFE_TIME (Life
time)
Type:
Real
Specifies the life time of the insert. The manufacturing attribute is
MFG_LIFE_TIME. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC_FINISH
(Finishing cutting speed)
Type:
Real
Defines the Finishing cutting speed of the tool. The manufacturing
attribute is MFG_VC_FINISH. |
MFG_SZ_FINISH
(Finishing feedrate per tooth)
Type:
Real
Defines the Finishing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_FINISH. |
MFG_VC_ROUGH
(Roughing cutting speed)
Type:
Real
Defines the Roughing cutting speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH. |
MFG_SZ_ROUGH
(Roughing feedrate per tooth)
Type:
Real
Defines the Roughing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_ROUGH. |
MfgTrigonInsert (Trigon Insert)
Description
Describes the MfgTrigonInsert resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT
(Comment)
Type:
String
Associates a comment to the resource. |
MFG_DESC_CODE
(Description code)
Type:
String
Possible values:
ANSI
ISO
NoCode
Defines the Description code: ISO or ANSI. The manufacturing attribute is
MFG_DESC_CODE. |
Geometry Attributes
These attributes characterize the insert shape and have an impact on the
tool path computation.
MFG_NOSE_RADIUS
(Nose radius : r)
Type:
Real
Specifies the nose radius of the insert. The manufacturing attribute is
MFG_NOSE_RADIUS. |
MFG_INSERT_LGTH
(Insert length : l)
Type:
Real
Defines the cutting edge length of an insert. The manufacturing attribute
is MFG_INSERT_LGTH. |
MFG_INSCRIB_DIAM
(Inscribed diameter : iC)
Type:
Real
Specifies the diameter of the inscribed circle of the insert. The
manufacturing attribute is MFG_INSCRIB_DIAM. |
MFG_INSERT_THICK
(Thickness)
Type:
Real
Specifies the thickness of the insert. The manufacturing attribute is
MFG_INSERT_THICK. |
MFG_CLEAR_ANGLE
(Clearance angle)
Type:
Real
Defines the clearance angle. The manufacturing attribute is
MFG_CLEAR_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on the
tool path computation.
MFG_MACH_QUALITY
(Machining quality)
Type:
String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing mode. The
manufacturing attribute is MFG_MACH_QUALITY with possible value ROUGH,
FINISH or EITHER. |
MFG_INSERT_MAT
(Material)
Type:
String
Possible values:
COATED_CARBIDE (Coated carbide)
CERMETS (Cermets)
CERAMICS (Ceramics)
CUBIDE_BORON_NITRIDE (Cubide Boron Nitride)
OTHER (Other)
Specifies the material of the insert. The manufacturing attribute is
MFG_INSERT_MAT. |
MFG_LIFE_TIME (Life
time)
Type:
Real
Specifies the life time of the insert. The manufacturing attribute is
MFG_LIFE_TIME. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC_FINISH
(Finishing cutting speed)
Type:
Real
Defines the Finishing cutting speed of the tool. The manufacturing
attribute is MFG_VC_FINISH. |
MFG_SZ_FINISH
(Finishing feedrate per tooth)
Type:
Real
Defines the Finishing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_FINISH. |
MFG_VC_ROUGH
(Roughing cutting speed)
Type: Real
Defines the Roughing cutting speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH. |
MFG_SZ_ROUGH
(Roughing feedrate per tooth)
Type: Real
Defines the Roughing feedrate per tooth of the tool. The manufacturing
attribute is MFG_SZ_ROUGH. |