Optimization
|
Selecting the parameters to
optimize
|
-
click the Optimization icon ().
The Optimization dialog box is displayed.
-
Select the Optimization type in the Optimization type
scrolling list.
-
Click Select.
-
In the Choose the parameter window, select
the parameters that you want to optimize.
-
Click OK when done.
|
Adding free parameters
|
-
click the Optimization icon ().
The Optimization dialog box is displayed.
-
Select the Optimization type in the Optimization type
scrolling list.
-
Click Edit list.
-
In the Select the free parameters window,
select the parameters that you want to use.
-
Click OK when done.
|
Adding ranges and steps to
free parameters |
-
click the Optimization icon ().
The Optimization dialog box is displayed.
-
Select the Optimization type in the Optimization type
scrolling list.
-
Click Edit list.
-
In the Select the free parameters window,
select the parameters that you want to use.
-
Click OK when done.
-
Select a free parameter in the Free parameters field
and click Edit ranges and step.
-
In the Modify the ranges and the step dialog
box, key in the ranges and the step.
-
Click OK when done.
|
Creating a Constraint
|
-
In the Constraints tab, click New.... The
Optimization constraints editor is displayed.
-
Enter the constraint body.
-
Click OK when done.
|
Creating a Constraint
with Derivatives
|
-
Click New (derivatives provider).
-
Select the Constraint in the Constraints list and use
the lower part of the window to assign it a formula.
-
Click OK when done.
|
Deleting a Constraint |
-
Select the constraint to delete in the Constraints tab.
-
Click Delete.
|
Modifying the name of a constraint |
-
Select the constraint that you want to modify in the
Constraints tab of the Optimization dialog box.
-
In the Name field of the Constraint definition section,
enter the new name of the constraint.
-
Click Apply when done.
|
Modifying the body of a constraint |
-
Select the constraint that you want to modify.
-
In the Name field of the Constraint definition section,
enter the new name of the constraint. The Optimization constraints
editor opens.
-
Enter the new body.
-
Click OK when done.
|
Assigning a Weight to a Constraint
|
-
Create a constraint.
-
Click the constraint in the table and enter a digit in
the Weight field.
|
Modifying the precision |
Use the spinner to modify the precision. By
default, the precision is set to 1. |
Adjusting priorities from weight |
-
Assign weights to the constraints in the Constraints
tab.
-
Click Adjust priorities From Weights.
|
Applying values to parameters |
-
Select a row in the Sorted results table.
-
Click Apply values to parameters. The values
displayed in this row will be applied to the parameters.
|
Selecting the parameters to display |
-
Click Select parameters to select the
parameters of the optimization file whose evolution will display in the
curves.
-
In the Select the parameters whose curve will be
displayed dialog box, select the desired parameters.
-
Click OK when done.
|
Valuating the ranges of free parameters
using a relation |
- Create an optimization containing
Free Parameters.
- Add ranges to the
free parameters in the Optimization window.
- Access the Relation editor (Formula\Rule Editor,...) and click the
Optimization in the specification tree. The free parameters are
displayed in the editor.
- Click the free parameters that you need to value. Click OK
when done.
|
Searching for a minimum value |
-
click the Optimization icon ().
The Optimization dialog box is displayed.
-
Select the Minimization Optimization type in
the Optimization type scrolling list.
-
Select the other optimization criteria.
-
Click Run optimization when done.
|
Searching for a maximum value |
-
click the Optimization icon ().
The Optimization dialog box is displayed.
-
Select the Maximization Optimization type in
the Optimization type scrolling list.
-
Select the other optimization criteria.
-
Click Run optimization when done.
|