About Representation Simplification

	DMU Optimizer lets you simplify a geometric representation with the following functionalities:
	Silhouette: keeps only the external representation of a model. The result obtained is as precise as the initial geometric representation.
	Wrapping: provides a simplified external representation of a geometry through an additional tessellation computation. Depending on the computation parameters selected, the result obtained can be very "light" (but less accurate) or more precise (but "heavier").
	Simplification: provides a simplified representation of a geometry through an additional tessellation computation.
	These three powerful functionalities allow the user to improve his productivity at any stage of the digital mockup review by significantly reducing the size of the mockups. They also offer an easy solution to protect confidential information by replacing accurate models with their simplified representation.
	The following examples aim at illustrating the gain obtained with these functionalities:
	Initial geometry 19348 triangles	Section


	Silhouette	Silhouette section
	Accuracy= 0.2mm Result= 3868 triangles


	Wrapping
	Before wrapping	After wrapping


	Simplification
	Initial geometry 19250 triangles	Simplification Accuracy= 0.5mm Result= 7708 triangles Note: the simplification result contains the inner parts of the mobile phone, therefore the number of triangles is higher than it is in the silhouette result.

	This simple example shows you how triangles are significantly reduced during simplification operation