Sheet Metal Shared Package

CATSHM_CircPattern 

Description

Describes a circular pattern.

Inheritance path

Standard - Feature -> Standard - Visualizable -> MechanicalModeler -> GeometricFeature ->MechanicalModeler - MechanicalFeature

CATSHM_RecPattern  

Description

Describes a rectangular pattern.

Inheritance path

 Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler -> MechanicalFeature

CATSHM_UserPattern  

Description

Describes a user pattern.

Inheritance path

 Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler -> MechanicalFeature

CATSmBeadPunch  

Description

Describes a Bead feature.

Attributes

BeadCrossRadius
Defines the cross section radius of the bead.

BeadEndRadius
Defines the ending radius of the bead.

StampRadius
Defines the fillet radius of the bead.

FD_BTLB
Defines the Bend Tangent Line from the Base feature side in the folded view

FP_BTLB
Defines the Bend Tangent Line from the Base feature side in the flattened view

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmBridgePunch  

Description

Describes the bridge feature.

Attributes

BridgeAngle
Defines the angle of the bridge.

StampRadius
Defines the fillet radius of the bridge.

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmCornerRelief  

Description

Describes the Corner relief feature.

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmCurvePunch  

Description

Describes the Curve stamp feature.

Attributes

CurvePunchAngle
Defines the angle of the curve stamp.

StampRadius
Defines the fillet radius of the curve stamp.

FD_BTLB
Defines the Bend Tangent Line from the Base feature side in the folded view

FP_BTLB
Defines the Bend Tangent Line from the Base feature side in the flattened view

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmExtendedExtrudedHolePunch  

Description

Describes the flanged cutout feature.

Attributes

FlangedCutOutAngle
Defines the angle of the flanged cutout.

StampRadius
Defines the fillet radius of the flanged cutout.

FD_BTLB
Defines the Bend Tangent Line from the Base feature side in the folded view

FP_BTLB
Defines the Bend Tangent Line from the Base feature side in the flattened view

FD_IML
Defines the Inner Mold Line in the folded view in the folded view

FP_IML
Defines the Inner Mold Line in the flattened view

FD_OML
Defines the Outer Mold Line in the folded view

FP_OML
Defines the Outer Mold Line in the flattened view

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmExtrudedHolePunch  

Description

Describes the flanged hole feature.

Attributes

ExtrudedHoleAngle
Defines the angle of the flanged hole.

ExtrudedHoleDiameter
Defines the diameter of the flanged hole.

StampRadius
Defines the fillet radius of the flanged hole.

FD_BTLB
Defines the Bend Tangent Line from the Base feature side in the folded view

FP_BTLB
Defines the Bend Tangent Line from the Base feature side in the flattened view

FD_IML
Defines the Inner Mold Line in the folded view in the folded view

FP_IML
Defines the Inner Mold Line in the flattened view

FD_OML
Defines the Outer Mold Line in the folded view

FP_OML
Defines the Outer Mold Line in the flattened view

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmFlange  

Description

Describes the flange feature.

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmLouverPunch  

Description

Describes the louver feature.

Attribute

StampRadius
Defines the fillet radius of the Louver.

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmPointPunch  

Description

Describes the circular stamp feature.

Attributes

PointPunchAngle
Defines the angle of the circular stamp.

PointPunchDiameter
Defines the diameter of the circular stamp.

StampRadius
Defines the fillet radius of the circular stamp.

FD_BTLB
Defines the Bend Tangent Line from the Base feature side in the folded view

FP_BTLB
Defines the Bend Tangent Line from the Base feature side in the flattened view

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmStamp  

Description

Describes the Stamp feature.

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmStiffeningRibPunch  

Description

Describes the Stiffening rib feature.

Attributes

StiffeningRibAngle
Defines the angle of  the stiffening rib.

StampRadius
Defines the fillet radius of  the stiffening rib.

FD_BTLB
Defines the Bend Tangent Line from the Base feature side in the folded view

FP_BTLB
Defines the Bend Tangent Line from the Base feature side in the flattened view

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmSurfacePunch  

Description

Describes the Surface stamp feature.

Attributes

StampRadius
Defines the radius of the surface stamp.

SurfacePunchAngle
Defines the angle of the surface stamp.

FD_BTLB
Defines the Bend Tangent Line from the Base feature side in the folded view

FP_BTLB
Defines the Bend Tangent Line from the Base feature side in the flattened view

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmUserPunch  

Description

Describes the User defined stamp feature.

Attributes

StampRadius
Defines the fillet radius of the user defined stamp.

FD_BTLB
Defines the Bend Tangent Line from the Base feature side in the folded view

FP_BTLB
Defines the Bend Tangent Line from the Base feature side in the flattened view

FD_IML
Defines the Inner Mold Line in the folded view

FP_IML
Defines the Inner Mold Line in the flattened view

FD_OML
Defines the Outer Mold Line in the folded view

FP_OML
Defines the Outer Mold Line in the flattened view

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmChamfer  

Description

Describes the Chamfer feature.

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmCorner  

Description

Describes the Corner feature.

Attributes

CornerRadius
Defines the corner radius.

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmCutOut  

Description

Describes the Cutout feature.

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmHole  

Description

Describes the Hole feature.

Attributes

HoleRadius
Defines the diameter of the hole.

HoleTypeClearance
Defines whether the hole is from type "Clearance".

HoleTypeFasten
Defines whether the hole is from type "Fasten".

HoleTypeIndex
Defines whether the hole is from type "Index".

HoleTypeManuf
Defines whether the hole is from type "Manufacturing".

Inheritance path 

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSm_Hole3D

Description

Describes the Hole3D feature.

Inheritance path

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

CATSmHopper

Description

Describes the Hopper feature

Inheritance path

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature

PredefinedFlange

Description

Describes the predefined flange feature.

Attributes

Angle
Defines the angle of the Flange.

Angle Type
Defines the type of angle of the Flange.

Length
Defines the length of the Flange.

Length Type
Defines the type of length of the Flange.

Radius
Defines the radius of the Flange.

Trim Type
Defines the type of trim of the Flange.

Type
Defines the type of Flange.

Inheritance path

Standard - Feature -> Standard - Visualizable -> MechanicalModeler - GeometricFeature -> MechanicaModeler - Body -> MechanicalModeler - MechanicalFeature