Reordering Sketch-Based Features

The way you configured your design environment affects the way the application locates sketches in the specification tree after reordering sketch-based features. This section discusses the two possible behaviors depending on whether you are reordering a sketch-based feature from:

To know how to activate or deactivate a hybrid design environment, refer to the Part Document section of the Customizing chapter of this guide.

From One Solid Body to Another One

When working in a non-hybrid design environment, sketches are represented both in the Part Body and under the target body after reordering features based upon them.

  1. This part contains two bodies created in a non-hybrid design environment.

  2. After reordering Pad.1 to locate it in Body.2, Sketch.1 on which it is based, is represented both under PartBody and under Pad.1.

From One Body to Another One

  1. This part contains two bodies created in a hybrid design environment.

  2. After reordering Pad.1 to locate it in Body.2, Sketch.1 is represented under Pad.1 only.