Displaying Control Points Temporarily

This task shows you how to temporarily display control points geometry while in a FreeStyle command.
Once you exit this command, the control points are removed as opposed to those displayed using the permanent visualization options (see Setting FreeStyle Visualization Options).

Open the FreeStyle_Part_44.CATPart document.

  1. Click the Match Curve icon:

  2. Click the Furtive Display icon:

  3. Successively select two curves. The first curve is automatically modified so as to be connected to the second curve.
    Control points are displayed in blue on the matched curve.

  4. Click OK in the current command.
    Multi-selection is available, meaning that if several elements are involved in the current command, if there were two curves to be projected for example when using the Project Curve icon the control points are displayed on all the resulting elements.