Using Control Points Cross Diffusion Laws

When using the Control Points capability, you need to define cross diffusion laws. See also Using Control Points Diffusion Laws.
A cross diffusion law defines the type of deformation that is to be applied to the selected control points and mesh lines which are not directly manipulated:
  • Cross diffusion laws:
    • Cross Constant Law: deforms all the selected control points which are not directly manipulated identically.
    • Cross Linear Law: deforms all the selected control points which are not directly manipulated with a linear law.
    • Cross Concave Law: deforms all the selected control points which are not directly manipulated with a linear concave.
      This option is P2-only.
    • Cross Convex Law: deforms all the selected control points which are not directly manipulated with a linear convex.
      This option is P2-only.
    • Cross Bell Law: deforms all the selected control points which are not directly manipulated with a bell law.
      This option is P2-only.
  • To link/unlink the diffusion laws with the cross diffusion laws:
    • Link Laws: diffusion laws with the cross diffusion laws are linked, the selected cross diffusion law selects automatically the equivalent diffusion law.
    • Unlink Laws: diffusion laws with the cross diffusion laws are unlinked.
Open the FreeStyle_Part_38.CATPart document.
  1. Click the Control Points icon:
    The Control Points dialog box appears.

  2. Move the Compass onto Surface.3.

  3. Click the Normal to compass icon if not already selected:

  4. Click the Constant Law icon if not already selected:

  5. Click the Select All Points icon:

  6. Click the Mesh only icon from the Options frame:

  7. Select the mesh line as shown in the image below.

Cross Constant Law

Follow steps 1 to 7. Carry out the steps as given below.

  1. Click the Cross Constant icon:

  2. Drag the mesh line close to the cursor in the image below.
    • The deformation according to the diffusion law is applied to the selected control points of the selected mesh line.
    • The deformation according to the cross diffusion law is applied to the selected control points out of the selected mesh line.
    In the image below, all points lying on the selected mesh line and the other selected control points undergo the same translation.

  3. Click OK to validate the modifications and close the dialog box.

Cross Linear Law

Follow steps 1 to 7. Carry out the steps as given below.

  1. Click the Cross Linear Law icon:
    • The deformation according to the diffusion law is applied to the selected control points of the selected mesh line.
    • The deformation according to the cross diffusion law is applied to the selected control points out of the selected mesh line.
    The deformation progresses along a straight line between the most distant selected points out of the selected mesh line.

  2. Click OK to validate the modifications and close the dialog box.

Cross Concave Law

Follow steps 1 to 7. Carry out the steps as given below.

  1. Click the Cross Concave Law icon from the Cross Diff frame:
    • The deformation according to the diffusion law is applied to the selected control points of the selected mesh line.
    • The deformation according to the cross diffusion law is applied to the selected control points out of the selected mesh line.
    The deformation progresses along a concave curve between the most distant selected points out of the selected mesh line.

  2. Click OK to validate the modifications and close the dialog box.

Cross Convex Law

Follow steps 1 to 7. Carry out the steps as given below.

  1. Click the Cross Convex Law icon from the Cross Diff frame:
    • The deformation according to the diffusion law is applied to the selected control points of the selected mesh line.
    • The deformation according to the cross diffusion law is applied to the selected control points out of the selected mesh line.
    The deformation progresses along a convex curve between the most distant selected points out of the selected mesh line.

  2. Click OK to validate the modifications and close the dialog box.

Cross Bell Law

Follow steps 1 to 7. Carry out the steps as given below.

  1. Click the Cross Bell Law icon from the Cross Diff frame:
    • The deformation according to the diffusion law is applied to the selected control points of the selected mesh line.
    • The deformation according to the cross diffusion law is applied to the selected control points out of the selected mesh line.
    The deformation progresses along a convex curve between the most distant selected points out of the selected mesh line.

  2. Click OK to validate the modifications and close the dialog box.