Defining Geometry Styles
Geometry styles are located in the following nodes of the Standard Definition editor, available via Tools > Standards:
By default, a style called Default is available for each geometry style.
All the parameters associated to a given geometry style are listed in a dedicated table. The Description column provides a description of each parameter.
All parameters are taken into account both at creation time (i.e. when creating a geometrical element), and at modification time (i.e. when reapplying a style to a geometrical element).
ConstructionPoint Style |
 |
|
Parameter Name |
Description |
|
Color |
Specifies the color that should be used to represent construction points. |
|
Point Type |
Specifies the type (e.g., cross, dot, etc.) that should be used to represent construction points. |
ConstructionCurve Style |
|
|
Parameter Name |
Description |
|
Color |
Specifies the color that should be used to represent construction curves. |
|
Line Type |
Specifies the number of the linetype (as defined in the LineTypes node of the current standard) that should be used to represent construction curves. |
|
Thickness |
Specifies the line thickness index (as defined in the LineThickness node of the current standard) that should be used to represent construction curves. |
|
Control Points > Color |
Specifies the color that should be used to represent control points in construction curves. |
|
Control Points > Point Type |
Specifies the type (e.g., cross, dot, etc.) that should be used to represent control points in construction curves. |
Point Style |
|
|
Parameter Name |
Description |
|
Color |
Specifies the color that should be used to represent points. |
|
Point Type |
Specifies the type (e.g., cross, dot, etc.) that should be used to represent points. |
Curve Style |
|
|
Parameter Name |
Description |
|
Color |
Specifies the color that should be used to represent curves. |
|
Line Type |
Specifies the number of the linetype (as defined in the LineTypes node of the current standard) that should be used to represent curves. |
|
Thickness |
Specifies the line thickness index (as defined in the LineThickness node of the current standard) that should be used to represent curves. |
|
Control Points > Color |
Specifies the color that should be used to represent control points in curves. |
|
Control Points > Point Type |
Specifies the type (e.g., cross, dot, etc.) that should be used to represent control points in curves. |
