A |
|
| absolute coordinates | Coordinates that specify a location in relation to the current coordinate system origin (0,0,0). |
| aggregation | The collecting of features or sketches into a Part Design feature in the specification tree. |
| associativity | The interdependent relationships between entities. |
B |
|
| body | See part body. |
C |
|
| chamfer | A cut through the thickness of the feature at an angle, giving a sloping edge. |
| child | A status defining the genealogical relationship between a feature or element and another feature or element. For instance, a pad is the child of a sketch. See also parent. |
| constraint | A geometric or dimension relation between two elements. These relations are restrictions for these elements. |
D |
|
| deactivate | To suppresses the behavior of a feature, visually and geometrically. |
| draft angle | A feature provided with a face with an angle and a pulling direction. |
F |
|
| feature | A component of a part. For instance,fillets and drafts are features. |
| fillet | A curved surface of a constant or variable radius that is
tangent to, and that joins two surfaces. Together, these three surfaces form either an inside corner or an outside corner. |
O |
|
| origin | The 3D point having the location 0,0,0 in any coordinate system. |
P |
|
| pad | A feature created by extruding a profile. |
| parent | A status defining the genealogical relationship between a feature or element and another feature or element. For instance, a pad is the parent of a draft. |
| part | A 3D entity obtained by combining different features. |
| part body | A component of a part made of a combination of several features. From Version 5 Release 14, bodies and part bodies include shape design features. |
| pattern | A set of similar features repeated in the same feature or part. |
| A feature corresponding to an opening through a feature. The shape of the opening corresponds to the extrusion of a profile. | |
| profile | An open or closed shape including arcs and lines created by the profile command in the Sketcher workbench. |
S |
|
| shell | A hollowed out feature |
| sketch | A set of geometric elements created in the Sketcher workbench. For instance, a sketch may include a profile, construction lines and points. |
| solid body | A body created with application versions prior to Version 5 Release 14. Such a body contains no shape design features. |