A |
![]() |
|
aggregation |
Aggregation is the recovery of the topological connections which existed in the original molded part prior to successive transfer of some faces in a new Geometrical set. |
|
C |
![]() |
|
cavity area |
Area that can be removed from the mold in the pulling direction. |
|
core area |
Area that can be removed from the mold in the direction opposite to the pulling direction. |
|
F |
![]() |
|
flag note | A hyperlink. | |
L |
![]() |
|
lifter | A mobile part designed to facilitate the removal of parts with hollow inside areas from the mold. | |
P |
![]() |
|
parting line | The outer boundary of the molded part where no undercut is found. | |
parting surface |
The surface delimiting the separation between core area and cavity area. | |
powercopy |
A set of features that are grouped in order to be used in a different context and that can be re-specified according to the context when pasted. | |
pulling direction |
Direction of removal from the mold. | |
S |
![]() |
|
slider | A mobile part designed to facilitate the removal of parts with draft surfaces from the mold. | |
split | the operation consisting in generating the parting surface on the core and cavity. | |
U |
||
undercut | Area that can not be removed from the mold. |