Tag and Path

This page deals with the Tag and Path options for Inspection.

Tag Setting

Tag Type
Use the pull down menu to select among the tag types.  The available types are:
  • Hit Point
  • Goto Point
  • PCS Point
  • RMeas Point
  • MCS Point

The default value is Hit Point.

Tag Style
Select a tag style:
  • Point
    • If you select point, you can choose dot or cross from the pull down menu; otherwise, the menu is grayed out.
  • Line
  • Arrow
  • Sphere
    • If you select sphere, you can select a diameter in Dia (mm) box; otherwise, the box is grayed out.

The default style for all tag types are to show the tags lines.

Tag Color
You can customize the colors for each tag type.

The default color for each tag type is shown below:

Hit Point
Goto Point
PCS Point
RMeas Point
MCS Point

Path Settings

Path Type
You can use the pull down menu to customize the appearance of a specified path type. The options are:
  • Feature Path
  • RMeas Path
  • Approach
  • Retract

The default value is Feature Path.

Path Style
You can select Solid Line or Dash Line.

The default value is Solid Line.

Path Color
You can customize the path color.

The initial color setting is shown above.

Show All Feature Path and Tags
f you select Show All Feature Path and Tags, any tags and feature paths you have created will be shown; if you deselect Show All Feature Path and Tags, it will be hidden.

The default value is to show paths and tags.