Human Builder   



This page deals with Display options.

 

 

Constraints



By default, when constraints are displayed, the following colors indicate the current state of the constraint. This also provides the capability to precise the type and width of the line shown on the 3D screen for constraints, depending on their status.
 

Updated and Resolved Green by default, indicates that the constraint is resolved
Updated and Not Resolved Red by default, indicates that the constraint could not be resolved
Not Updated Black by default, indicates that the constraint has not been updated.
Inactive Yellow by default, indicates that the constraint is no longer active
Temporary Blue by default, indicates that the constraint is not permanent

Vision


Select the colors accordingly.

Use the Peripheral Contour Rotation for setting the Vision window at its full height, instead of constantly resizing the vision window, we propose to adjust the vision window height only once the manikin's head exceeds a certain degree of lateral inclination as shown below.  In this example, the vision window remains at the same height if the manikin is inclined for less than 35 degrees.

Twin Segments (Reach and IK Mode)



Select the colors accordingly.

Loads

The load representations can be displayed in several ways:


Select the colors accordingly.

Load Arrow (default): the forces acting on the hands

Force Line: the reactive (opposite direction from the force)

None: nothing is displayed

Offsets


Select the colors accordingly.

Hand Grasp

Select the colors accordingly.