 |
| This page deals with the options concerning:
|
Angular Size
|
 |
| Defines the angular size options: |
Default upper tolerance value
|
| Defines the default upper tolerance value for angular size. |
By default, the upper tolerance is 0.1deg. |
Symmetric lower limit
|
| Defines whether the default lower tolerance value is
symmetric in relation to the default upper tolerance value. |
|
By default, this option is selected. |
Default lower tolerance value
|
| Defines the default lower tolerance value for angular size,
enable when Symmetric
lower limit is not selected. |
|
By default, the lower tolerance is -0.1deg. |
Numerical value increment
|
| Defines the increment for angular size numerical value. |
|
By default, the increment is 0.1deg. |
General tolerance class
|
| Defines the general tolerance class for angular
size, according to the selected standard in
Tolerancing
Standard. |
|
By default, the general tolerance class is ISO 2768 - f. |
 |
Linear Size
|
 |
| Defines the linear size options: |
Default upper tolerance value
|
| Defines the default upper tolerance value for linear size. |
|
By default, the upper tolerance is 0.1mm. |
Symmetric lower limit
|
| Defines whether the default lower tolerance value is
symmetric in relation to the default upper tolerance value. |
|
By default, this option is selected. |
Default lower tolerance value
|
| Defines the default lower tolerance value for linear size,
enable when Symmetric
lower limit is not selected. |
|
By default, the lower tolerance is -0.1mm. |
Numerical value increment
|
| Defines the increment for linear size numerical value. |
|
By default, the increment is 0.01mm. |
Default tabulated value
|
| Defines the default tabulated for linear size. |
|
By default, the tabulated value is H7. |
General tolerance class
|
| Defines the general tolerance class for angular
size, according to the selected standard in
Tolerancing
Standard. |
|
By default, the general tolerance class is ISO 2768 - f. |
|
|
Geometrical Tolerance
|
 |
| Defines the geometrical tolerance options: |
Default numerical value
|
| Defines the default numerical for geometrical tolerance. |
|
By default, the numerical value is 0.1mm. |
Numerical value increment
|
| Defines the increment for the geometrical tolerance
numerical value. |
|
By default, the numerical increment value is 0.01mm. |
Precision
|
| Defines the geometrical tolerance precision after the
numerical separator. |
|
By default, the precision is 0.01. |
Separator
|
| Defines the geometrical tolerance symbol used as numerical
separator. |
|
By default, the separator is a comma ",". |
Display trailing zeros
|
| Defines whether "0"s complete the number of digit displayed
after the separator, according to the precision. |
|
By default, this option is not selected. |
Display leading zeros
|
| Defines whether the "0" before the numerical separator,
when value is less than 1, is displayed. |
|
By default, this option is selected. |
|
|