ServeRAID controller

Use the ServeRAID controller actions to verify whether the non-volatile random access memory (NVRAM) found on the controller is operating properly, to check the status of the physical drives, and to list information about the controller.

Prerequisites for performing actions on the ServeRAID controller

To perform the Determine Status of Drives in Array action, at least one hard disk drive must be attached to the ServeRAID controller.

Actions

Use the following actions to diagnose the ServeRAID controller:

Results

The Results field displays the results of the action and provides detailed information for resolving issues. Use the documentation that comes with your server for information about correcting a failed device.


Contents

 

x-0003-RTD-00-01-EN