This table contains the default key functions on POWERserver and POWERstation keyboards. The position of keys on the keyboard does not change when executing the emulator locally or remotely through a TCP/IP connection. Refer to "Special Keys" for a description of these functions.
| Default e789 Key Functions on POWERserver and POWERstation Keyboards | |||
| Function | Press | Function | Press |
| TAB | Tab | PF15 | Shift-F3 |
| BTAB | Shift-Tab | PF16 | Shift-F4 |
| ENTER | Ctrl/Action | PF17 | Shift-F5 |
| SYSREQ | Alt-Print Screen | PF18 | Shift-F6 |
| CLEAR | Pause | PF19 | Shift-F7 |
| BACKSPACE | Backspace | PF20 | Shift-F8 |
| CHGDIS | Ctrl-keypad 6* | PF21 | Shift-F9 |
| INSERT | Insert | PF22 | Shift-F10 |
| DELETE | Delete | PF23 | Shift-F11 |
| HOME | Home | PF24 | Shift-F12 |
| PA1 | Page Up | Print Screen | |
| PA2 | Page Down | SAVES | Shift-Scroll Lock |
| PA3 | Ctrl-Right Arrow | REPLS | Scroll Lock |
| SPACEOF | End | BTABW | Ctrl-A |
| DOWN | Down Arrow | EOF | Ctrl-B |
| DDOWN | Shift-Down Arrow | SHELL | Ctrl-C * |
| RIGHT | Right Arrow | QUIT | Ctrl-D |
| RRIGHT | Shift-Right Arrow | ERASE | Ctrl-E |
| LEFT | Left Arrow | FTABW | Ctrl-F |
| LLEFT | Shift-Left Arrow | ENDF | Ctrl-G |
| UP | Up Arrow | BACKF | Ctrl-K |
| UUP | Shift-Up Arrow | LENDF | Ctrl-L |
| PF1 | F1 | NEWLINE | Ctrl-M |
| PF2 | F2 | FMARK | Ctrl-N |
| PF3 | F3 | NEXT | Ctrl-O |
| PF4 | F4 | POREST | Ctrl-P |
| PF5 | F5 | RESET | Ctrl-R |
| PF6 | F6 | REFRESH | Ctrl-T |
| PF7 | F7 | DUP | Ctrl-U |
| PF8 | F8 | HCONUTIL | Ctrl-V |
| PF9 | F9 | DELWORD | Ctrl-W |
| PF10 | F10 | DOIA | Ctrl-X* |
| PF11 | F11 | CLICK | Ctrl-Y* |
| PF12 | F12 | JOBCTRL | Ctrl-Z* |
| PF13 | Shift-F1 | NEWLINE | Enter |
| PF14 | Shift-F2 | ATTN | Ctrl-Print Screen |
| SHIFTDISP | Ctrl-F1 (DBCS only) | ||
| XLATE | Ctrl-F3 (Japan only) | ||
| CURSEL | Ctrl-1 | ||
Note: An * (asterisk) indicates that the function is not supported in the X-Windows Environment using the xhcon command.