**************> QUESTION level 1 --> level 2 SPECIALIST <**************
1. How to replace Ethernet Adapter of CWS?
I'm now using RS/6000 C20 as Control Work Station.
AIX V4.14 and PSSP Ver 2.1 PTF 13 is running on it.
Ethernet Adapter(#2980) is installed and configured as en0 and
connected to SP Ethernet(10BASE-2 Cable).
Now I would like to change this adapter from #2980 to #2993
Ethernet 10Mbps BNC Adapter. Please let me know is there
any operation to change adapter from point of PSSP side.
2. How to change initial host name.
Our SP system node has 1 ethernet adapter(en0) and 2 FDDI
adapters(fi0 and fi1). Now Initial host name is set to en0.
I would like to change initial host name from en0 to fi0.
Please let me know step to do this change.
I am now planning to...
1. Change initial hostname using "Hostname Information" of
"smit node_data" or sphostnam command.
2. Set boot mode as "customize" using "The Boot/Install
Server Information" of "smit node_data" or spbootins
command.
3. Netboot from spmon
Any comments are helpful.
************** ANSWER level 2 -- level 1 SPECIALIST **************
==== THIS TEXT HAS BEEN ENTERED BY IBM IN USA
==== RESP: ENDY AT WTSCPOK ================= DATE:960911
TIME:1553
Since you only plan to change the ethernet adapter on the control
workstation, you do not have to perform any special task with PSSP
for the new adapter.
How to change initial host name:
In addition to the three steps you mentioned, you will have to get
Kerberos to recognize the new host name. The following procedure
below will be helpful in trying to rebuild your KDB.
1. Ensure the following directories are included in your PATH
/usr/lpp/ssp/kerberos/etc
/usr/lpp/ssp/kerberos/bin
/usr/lpp/ssp/bin
2. kdb_destroy (delete the kerberos database)
3. kdestroy (delete all current tickets)
4. rm /.k (delete the master key cache file)
5. rm $HOME/.klogin
6. rm /etc/krb* (delete the Kerberos configuration files)
7. chitab "kadm:2:off:/usr/lpp/spp/kerberos/etc/kadmind -n"
chitab "kerb:2:off:/usr/lpp/spp/kerberos/etc/kerberos"
8. telinit 2 (refresh inittab)
9. stopsrc -s hardmon
10. setup_authent
HR
CENTER
FONT size=2WWQA: ITEM: RS4000002901 ITEM: RS4000002901
BRDated: 10/1996 Category: AIX6000
BRThis HTML file was generated 99/06/24~12:43:03
BRComments or suggestions?
A href="../../../feedback.htm"BContact us/B/ABR
/FONT
/CENTER
/BODY
/HTML