RPQ #8K1744 6091-023 SUPPORT FOR THE XSTATION.
ITEM: RTA000020368
QUESTION:
Can the 6091-23 with RPQ 8K1744 installed be used both directly
attached to the RISC/6000, as well as to the Xstation (not at one time)?
Or once the RPQ is installed, can the display ONLY be attached to an
Xstation?
---------- ---------- ---------- ---------- ---------- ----------
A: Yes, you can use the either of the monitors (6091-23 or 5081-16) with
the RPQs for the Xstations, on either the RISC or the Xstation after
the RPQ is installed on the monitor. The Xstation will use the special
6091 attachment cable which has 5 connectors (the black and white
are the horizontal and vertical sync). When you go to the RISC,
you can even use the same cable, however, just leave the black and
white connectors unattached at the monitor for sync-on-green which
is used for the RISC.
---------- ---------- ---------- ---------- ---------- ----------
---------- ---------- ---------- --------- ---------- ----------
This item was created from library item Q555763 OPCZ4
Additional search words:
#8K1744 ATTACH ATTACHED ATTACHMENT HARDWARE IX LIMIT LIMITATION
OPCZ4 OZNEW RISCSYSTEM RISCXSTA RPQ SEP91 SUPPORT SUPPORTED XSTATION
6091-023 8K1744
WWQA: ITEM: RTA000020368 ITEM: RTA000020368
Dated: 03/1996 Category: RISCXSTA
This HTML file was generated 99/06/24~12:43:08
Comments or suggestions?
Contact us