QUESTION:
I have a system 7011-250 that was mis-ordered and contains a
3.5" diskette drive, when it should not. I need a part number for
the bezel that the CE can insert in the hole after removing the drive.
Please advise ASAP.
Thank you.
---------- ---------- ---------- --------- ---------- ----------
A: After some further researching, we have found out that the front
bezel is actually part of the entire cover. What happens is when
a diskette drive is installed, the diskette cover plate is popped
off. There is no separate part number for this removed diskette
cover plate. This, unfortunately, is not mentioned in any of the
service manuals for the 250.
If you would like to replace the 250's cover in order to get a
cover without the diskette cover plate removed, the part number
for the entire cover is 81F9159. Otherwise, you might consider
just finding a piece of paper or plastic to cover the hole.
Thank you.
---------- ---------- ---------- --------- ---------- ----------
This item was created from library item Q677860 FFSKM
Additional search words:
AUTO AUTOMATIC BEZEL DASD DISKETTE DRIVE FFSKM FLOPPY GET HARDWARE
INFO IX JAN95 NUMBER NUMBERING NUMERIC NUMERICAL OZIBM OZNEW PART
RISCSYSTEM RISCSYSU SYS SYSTEM UNIT URGENT 7011-250
WWQA: ITEM: RTA000054122 ITEM: RTA000054122
Dated: 10/1996 Category: RISCSYSU
This HTML file was generated 99/06/24~12:43:21
Comments or suggestions?
Contact us