QUESTION:
How do you support multiple NIC segments within RS/6000 running with
Netware?
---------- ---------- ---------- --------- ---------- ----------
A: I assume that NIC refers to Network Interface Card. NetWare will
support multiple network interface cards on the same server, as long
as the internal network number and the NetWare network number are
set properly.
Page 6 of "Crafting NetWare for AIX Installing and Configuring NetWare
for AIX/6000" (GG24-3686-00) gives the following details:
These are 8-digit hexadecimal numbers that help to uniquely identify
servers and LANs. The NetWare network number must be the same for
all servers on a specific Netware LAN (e.g. a single Token-ring).
The internal network number must be unique for each server in a LAN.
The combination of both the NetWare network and internal network
number identifies a unique address in the NetWare internet and a
unique server and network interface pairing.
---------- ---------- ---------- --------- ---------- ----------
This item was created from library item Q651520 CPGZH
Additional search words:
COMMUN COMMUNICATIO CPGZH EXECUTE FEB94 IX MULTIPLE NETWARE NIC
OZNEW RISC RISCOC RISCSYSTEM RUNNING SEGMENTS SOFTWARE SUPPORT
SUPPORTED WITHIN
WWQA: ITEM: RTA000038152 ITEM: RTA000038152
Dated: 01/1995 Category: RISCOC
This HTML file was generated 99/06/24~12:43:15
Comments or suggestions?
Contact us