HOWTO AIX: COMMON PROBLEMS AND ANSWERS TO 3151

ITEM: RTA000019888



PLATFORM: RISCSYSTEM AIXRT AIXPS2 AIX370                                        
                                                                                
*********************************************************************           
** This item contains information that is intended to be helpful,  **           
** accurate and act as a guide of HOW TO accomplish a given system **           
** task.  The provided explanations, techniques and procedures     **           
** have been reviewed for technical accuracy and applicability,    **           
** but have not been tested in every possible environment or       **           
** situation. Normal precautions should be taken in adopting these **           
** same techniques and procedures, because as product and system   **           
** interfaces change, so would the usage of this information       **           
** change.                                                         **           
*********************************************************************           
                                                                                
SOLUTION:                                                                      
                                                                                
NOTE:  ##############################################################           
#####################################################################           
##                                                                 ##           
## This item contains characters that may not print or display     ##           
## correctly on all systems.  A flag line has been placed BENEATH  ##           
## each line that contains one or more of those characters.  Flag  ##           
## lines can be identified by the characters "@@" in columns 71    ##           
## and 72.  The position of each unprintable or non-displayable    ##           
## character is identified by one of the following letters         ##           
## contained in the flag line and located directly beneath that    ##           
## character.                                                      ##           
##                                                                 ##           
##    A - left square bracket          G - logical not             ##           
##    B - right square bracket         H - exclamation point       ##          
##    C - left brace                   I - vertical bar            ##           
##    D - right brace                  J - back slash              ##           
##    E - percent sign                 K - tilde                   ##           
##    F - caret (circumflex)           L - back quote (accent)     ##           
##                                                                 ##           
#####################################################################           
#####################################################################           
                                                                                
                    Common Problems of 3151                                     
                                                                                
 MODEL IDENTIFICATION                                                           
  1. Model 110 if Machine Modes are: IBM 3151 and 10 ASCII Emulations.          
     Must use the 84-key ASCII keyboard.                                        
  2. Model 310/410 if Machine Modes are: IBM 3151, IBM 3101 and 10              
     ASCII Emulations. 310 is green and 410 is amber-gold.                     
     Must use the 102-key ASCII keyboard.                                       
  3. Model 510/610 if Machine Modes are: IBM 3151PC, 3151PCII and               
     TVI925PC Mode. 510 is green and 610 is amber-gold.                         
     Must use the 101-key PS/2 keyboard.                                        
  4. 3151  Video Display Part Numbers                                           
           110     81X4500   09F3483                                            
           310     81X4501   09F3484                                            
           410     81X4511   09F3485                                            
           510     -------   38F5101                                            
           610     -------   38F5104                                            
                                                                                
FUNCTION KEYS DO NOT WORK                                                       
  1. AIX requires 'Turnaround Character = CR' in Communication Setup,           
     default is ETX.                                                            
  2. Using 3151 Model 510/610, and application redefines the function          
     keys. The Model 510/610 DOES NOT support redefinition of                   
     function keys. Requires a model 310/410.                                   
  3. An application, (example UNIPLEX) redefines function keys on               
     models 310/410 and does not reset the function keys back to                
     default values when exiting UNIPLEX. Host must transmit 3151               
     `Set All Function Keys Command' (ESC SP t).                                
     L                                                                @@        
                                                                                
INSERT KEY DOES NOT WORK                                                        
  1. Change INSERT CHARACTER setup option between MODE and SPACE.               
                                                                                
DOUBLE CHARACTERS ARE DISPLAYED                                                 
  1. Change OPERATING MODE from CHAR to ECHO.                                   
                                                                                
DOUBLE PROMPT WHEN ENTER/RETURN KEY IS PRESSED on AIX                          
  1. Change NEW LINE setup option from CR/LF to CR.                             
                                                                                
3151 LOCKS UP                                                                   
  1. Turn on 'Status Line' either from keyboard or from setup. This             
     provides additional information. The following items may be                
     displayed on status line:                                                  
       'HOST BUSY'   - Host told 3151 do not send data to host.                 
                       Problem must be corrected at host.                       
       KEYS LOCKED - Host sent 'Keyboard Lock' command. Host must               
                     send Keyboard Unlock' command. Problem must be             
                      corrected at host.                                        
       HOLD SCREEN - Operator pressed 'Hold' or 'Pause' key, must               
                       press 'Hold' or 'Pause' key again.                       
  2. Operator accidentally pressed Ctrl-S (XOFF), press Ctrl-Q (ON).            
                                                                               
3151 DOES NOT COMMUNICATE TO HOST                                               
  1. Turn on 'Status Line', if 'COMM NOT READY 2' is displayed,                 
     change 'Line Control' = IPRTS.                                             
  2. Host cable is attached to Auxiliary port rather than the Main              
     port.  The main port is on the right hand connector, looking               
     from the back.                                                             
  3. The Transmit Data, Receive Data pins do not match the host                 
     communications port. Check pin configuration on the host system.           
  4. The host system does not have communications port enabled.                 
  5. Second session not working when using Connectivity Cartridge in            
     Dual Session by Dual Port. The directions of pins 2 (TD) and               
     3 (RD) are reversed. Switch pins 2 and 3 on the communications             
     cable attached to the Auxiliary port.                                      
                                                                                
3151 MISSING or LOSING CHARACTERS                                              
  1. Pacing problem - reduce line speed to 2400 or 4800 and confirm             
     that it is a pacing problem. Activate pacing at the 3151 and the           
     host.                                                                      
                                                                                
3151 LOSING SETUP VALUES                                                        
  1. Host could be changing setup values by various 3151 commands:              
     Set Control, Create Viewport.                                              
  2. User changes setup options in setup menu, but never performs the           
     'Save' operation, must cursor to 'Save' and press spacebar.                
                                                                                
CANNOT GET INTO SETUP                                                           
  1. Mismatch of keyboards with the video element.                              
       - 110 video element with a 310/410/510/610 keyboard,                     
         press Ctl-F4 to enter setup.                                           
       - 310/410/510/610 video element with a 110 keyboard,                    
         impossible to enter setup.                                             
  2. DEC VT200/VT100/VT52 emulation is selected, and keyboard does              
     not have DEC Keycap kit. Press the F3 key, the location of the             
     setup key when in DEC emulation.                                           
                                                                                
CANNOT PRINT, NOT PRINTING CORRECTLY                                            
  1. Printer must be a serial printer not parallel.                             
  2. Incorrect cable being used with printer. Note directions of                
     the Receive and Transmit data pins.                                        
                                                                                
3151 DISPLAYS BACKWARDS QUESTION MARKS                                          
  1. A frame error, the: Parity, Word Length, Stop Bits, Line Speed             
     must match the host system.                                                
                                                                                
THE (*,/,-,Alt,Ctrl,Page Up,Page Down) KEYS ARE NOT WORKING                    
  1. Using a model 510/610 in ASCII Mode, keyboard becomes a 310/410            
     ASCII Layout. Refer to page 3-1, 3-2 of 3151 Guide to Operations.          
     Models 51,61.                                                              
                                                                                
LINE DRAWING CHARACTERS DO NOT DISPLAY                                          
  1. A character mismatch between host and 3151. 3151 offers the                
     following character sets: Special Graphics, PC 00437, PC 00850,            
     ISO 8859/1.2. Determine the character set defined in 3151,                 
     and what host is expecting.                                                
                                                                                
APPLICATION IS NOT DISPLAYING CORRECTLY                                         
  1. Host commands are not matching what 3151 is set to. 3151 is set            
     to IBM 3151 and host could be using DEC VT100, WYSE 50/50+.                
     Use 3151 Transparency mode to determine what host is sending.              
                                                                               
CANNOT REDEFINE FUNCTION KEYS                                                   
  1. Using a model 510/610. Function is not supported.                          
                                                                                
CONSTANT BEEP                                                                   
  1. Using a cartridge in model 110. Cartridges are not supported.              
                                                                                
SCREEN IS WAVY                                                                  
  1. Change refresh rate between between 50 and 60 hertz.                       
     Press Ctrl-Shift-Hold. 3151 displays keyboard test pattern.                
     Press Ctrl-F10. 3151 displays A or B (refresh rate).                       
     Press F1 to toggle between A or B.                                         
     Power off and on 3151.                                                     
                                                                                
REFERENCES:                                                                     
                                                                               
IBM 3151 Display Station Reference - GA18-2634-01                               
IBM 3151 Guide to operations - GA18-7015-00                                     
                                                                                
 *****************************************************************         
 ** If you have found this information to be informative and    **         
 ** useful, please let us know via a HONE FEEDBACK or via EQUAL.**         
 ** Make sure in your evaluation to reference the appropriate   **         
 ** INFOSYS or FLASH number.                                    **         
 ** We would like to develop as many HOWTO items as needed      **         
 ** and solicit your suggestions, comments and recommendations  **         
 ** on how to make these entries more useful. We need to know   **         
 ** the value of this information to determine whether it is    **         
 ** worth IBM time and resource to continue to create and       **         
 ** maintain HOWTO items.                                       **         
 *****************************************************************        
                                                                                
---------- ---------- ---------- --------- ---------- ----------                
                                                                                
                                                                                
This item was created from library item Q550985      9VPBN                      
                                                                                
Additional search words:                                                        
$$A AIX AIXPS2 AIXRT AIX37 AIX370 ALTERNATE ANSWER COMMON HARDWARE              
HOWTO INDEX ISSUES IX JUL91 OZIBM OZNEW PROBLEMS RELATED RISCOHW                
RISCSYSTEM TERMINAL 3151 9VPBN                                                  
                                                                                
                                                                                
                                                                                
                                                                                
                                                                               


WWQA: ITEM: RTA000019888 ITEM: RTA000019888
Dated: 03/1996 Category: RISCADEV
This HTML file was generated 99/06/24~12:43:08
Comments or suggestions? Contact us