ITEM: HQ8833L

Acif will not process formdef



Defect?:

Acif will not process formdef with  paper from
multiple bins using the subgroup command. 

 PROBLEM:Byron is using pre-printed paper as well as printed
         paper. Certain print jobs use both types of paper.
         Byron  uses the subgroup command in acif to pull the 
        paper from different bins.

        This causes an error from Acif, it does not want to accept 
        multiple input sources. 

*ACTION TAKEN: Requested Byron email me the error message from Acif.
        Byron says that he has run the same jobs without acif and 
        they run successfully using a customized formdef and pagedef. 

Next action: Email from Byron follows
        The formdef used:
--------------------------------------------------------------------

 /*******************************************************************/          
 /* FORMDEF to print overlay MCG302                                  */         
 /*******************************************************************/          
 FORMDEF APCHK  REPLACE YES  OFFSET 0 0;                                                                                                                       
 copygroup 001 duplex no;  
    overlay KHSIG KHSIG;
    overlay 303 MCG303;
  SUBGROUP COPIES 1 bin 4 overlay KHSIG 303 ;
  SUBGROUP COPIES 2 bin 1 OVERLAY 303;
/***************************************************************/
/*  pagedef for direct deposit and checks                      */
/***************************************************************/
 pagedef APCHK replace yes 
 width 8.5 in
 height 11.0 in;
 setunits 1 in 1 in linesp 6 lpi;
 font gt10 gt10;
 font cr10 cr10;
 printline
 channel 1
 font gt10
 repeat 4
 position 0 in .15 in;
 printline      /*  5th line */
 position 0 in .75 in
 font gt10;
 printline
 position 0 in 1.0 in
 repeat  61; 
---------------------------------------------------------------------
The error from acif follows
---------------------------------------------------------------------
0425-415 pagedef=P1APCHK
0425-415 formdef=F1APCHK
0425-415 inputdd=/psf/src/apchk.dat
0425-415 outputdd=/psf/src/apchk.afp
0425-415 cc=yes
0425-415 inpexit=/usr/lpp/psf/bin/asciinpe
0425-415 msgdd=err.fil
0425-188 DATA IN A FORMDEF RESOURCE IS INVALID: THE SET OF
MODIFICATIONS SPECIFIED IN THE MCC STRUCTURED FIELD SELECTS MORE THAN
  ONE INPUT SOURCE.
0425-105 THE ERROR REPORTED ABOVE OCCURRED IN LOGICAL RECORD NUMBER 1, 
  WHOSE SEQUENCE NUMBER IS NOT AVAILABLE.
0425-441 ACIF HAS COMPLETED PROCESSING ABNORMALLY, WITH RETURN 
  CODE 16, REASON CODE 16.

--------------------------------------------------------------------

*ACTION TAKEN: Customer called back in and I found PMR 67402,227,000
with the same issue.  It shows that the ACIF code had been changed to
make selecting multiple input bins invalid.  I had the customer
download the fix UQ20896 as stated fixes this problem.


Support Line: Acif will not process formdef ITEM: HQ8833L
Dated: December 1998 Category: N/A
This HTML file was generated 99/06/24~13:30:13
Comments or suggestions? Contact us