ITEM: FR1247L

Hanging on led 610 when doing a sysback network boot

Question:

Env:
  AIX 4.2.1
  RISC R24
  sysback 4.1.4.4

Problem:
  Customer is trying to perform a network boot from one R24 to
  another and it is hanging on led 610

Action Taken:
  I first had the customer go through the complete fax on
  sysback.led.610.sys which is on 1-800-IBM-4FAX  document 8579
  on the boot server system.

  That did not fix the customers problem.

  lssrc -g nfs -->
 Subsystem         Group            PID     Status 
 biod             nfs              \#\#\#\#    active
 nfsd             nfs              \#\#\#\#    active
 rpc.mountd       nfs              \#\#\#\#    inactive
 rpc.statd        nfs              \#\#\#\#    active
 rpc.lockd        nfs              \#\#\#\#    active

startsrc -s rpc.mountd
It still did not start that resource

host 127.0.0.1  returns bad information for loopback
Created the /etc/netsvc.conf file with hosts=local,bind

Now the customer could start the rpc.mountd and now the
other system could boot to service mode using sysback



Support Line: Hanging on led 610 when doing a sysback network boot ITEM: FR1247L

Dated: May 1998 Category: N/A

This HTML file was generated 99/06/24~13:30:14

Comments or suggestions?
Contact us