ITEM: CN9362L

Configuring the 7331 for Legato

PROBLEM:

7331 and exebyte drive
Atape.driver 2.4.4

*CUSTOMER REP:
Kannan Varadachari

 PROBLEM:
Arm for 7331 is not coming available after failed install.

*ACTION TAKEN:
This system is configured for Legato, the tape drives are showing
available but not the scsi library interface.

By using the scsi bus analysis tool, we are able to contact the
library device, so this isn't a hardware issue.

We determined that the scsi interface is a 'lus' of type 'port':

lsdev -Cc port

lus0 Available  Legato Scsi Interface 4.2

This was not in the pre-defined database on the system with the
problem:

lsdev -Pc port   \<--- nothing shows up.

So the failed install must have wiped out the driver from legato,
I told the customer to reinstall the driver.

*ACTION PLAN:
CWCA
 TEST CASE:
n/a



Support Line: Configuring the 7331 for Legato ITEM: CN9362L

Dated: May 1997 Category: N/A

This HTML file was generated 99/06/24~13:30:17

Comments or suggestions?
Contact us