Port number to use for adding tty to PCMCIA modem on 820
ENV: ver 4.1.4
power pc 820
The customer is installing a pcmcia modem card and needs assistance.
Install devices.pcmcia.serial (common IBM PCMCIA Serial Port Software)
devices.pcmcia.a4001d00 (IBM PCMCIA High Speed Fax Modem Card Software)
through SMIT install, and then run cfgmgr.
Once lslpp -h |grep devices.pcmcia.a4001d00 shows software is installed:
lsdev -Cc adapter; (sa2 available, pcmcia modem). smitty tty,
add a tty, rs232, sa2, port number = s (as in Sam).
tty0 is now available on 05-02-01-00 (sa1) PCMCIA adapter.
Added entries to /etc/uucp/Devices:
Direct tty0 - 9600 direct
ACU tty0 - 9600 hayes
We tested with cu -ml tty0
We get connected to the modem and "AT" command to the modem
causes it to return "OK" and the modem is working fine.
Support Line: Port number to use for adding tty to PCMCIA modem on 820 ITEM: BL9421L
Dated: August 1996 Category: N/A
This HTML file was generated 99/06/24~13:30:21
Comments or suggestions?