Env:
AIX 4.1.4
RISC SP2
Tape 3590 Model B11
Atape.driver 2.5.2.0
Desc:
How to load tapes in a 3590-B11 tape drive
Action:
There are three methods:
MANUAL MODE
------------
Put tape in either the import/export slot or top slot (1)
Hit START button on the 3590 front panal
To unload:
Hit UNLOAD button on the 3590 front panal
AUTOMATIC MODE:
---------------
Put tape in first slot (1). The tape can't be in the
import/export slot, because it will not load from there.
It will always check the first slot with a tape
in it (1 - 10 slot)
Hit START button on the 3590 front panal
To unload and put next tape in the drive
HIT UNLOAD button on the 3590 front panal
RANDOM MODE:
Put tape in a slot it does not matter which you use
Break down of the slot numbers in the tape drive according
to the "tapeutil -f /dev/rmt\# inventory" output
31 -- Import/Export
16 -- Tape drive
32 (top) - 41 (bottom) slot
Run this command: tapeutil -f /dev/rmt\# mount \
To unload:
Run this command: tapeutil -f /dev/rmt\# umount \
Next Action:
Closing with customer approval
Support Line: How to load tapes in a 3590-B11 tape drive ITEM: BL8710L
Dated: July 1996 Category: N/A
This HTML file was generated 99/06/24~13:30:21
Comments or suggestions?
Contact us