ITEM: BG4024L
clverify states that system needs APARs IX51671 and IX54057.
Env: AIX 4.1.4, 580
HACMP 4.1.1
Desc: When running clverify it said that customer needed two APARs.
The APARS are IX51671 and IX54057:
U438762
---
devices devices.mca.8f78.rte bos41J aix@ausaix02@2035
APAR Defect Description
------- ------ ---------------------------------------
IX51671 180291 CMD HUNG IF ADDRESSING A DISK OF A POWERED-OFF SERIAL
FILES
-------
/
/usr
/usr/lib/drivers/sdpin
/usr/lpp
/usr/lpp/devices.mca.8f78/devices.mca.8f78.rte/4.1.3.1
/usr/lpp/devices.mca.8f78/devices.mca.8f78.rte/4.1.3.1/liblpp.a
U440450
---
devices devices.scsi.tm.rte bos41C aix@ausaix02@2035
APAR Defect Description
------- ------ ---------------------------------------
IX54057 186542 TARGET MODE LOCKING ON SMP FAILS
FILES
-------
/
/usr
/usr/lib/drivers/tmscsidd
/usr/lpp
/usr/lpp/devices.scsi.tm/devices.scsi.tm.rte/4.1.4.1
/usr/lpp/devices.scsi.tm/devices.scsi.tm.rte/4.1.4.1/liblpp.a
Action: Looks like this is a known defect:
The clverify command checks for specific APARs that may need to be
applied to the system. These apars are included on the installation
media you have just received for HACMP or HANFS. Use smit
install_fileset to install the APARs using your installation media,
only those filesets that are currently installed for those APARs will
be updated. You may wish to use the preview option on the smit screen
to see if filesets really need to be updated.
If you installed AIX 4.1.4.0 fresh then these two APARs IX51671 and
IX52957 will have been included in the 4.1.4.0 installation for the
filesets that fix these APARs; however the instfix command may report
no data on the APARs.
The messages may be ignored if you have the 4.1.4 or later versions
of these filesets:
devices.mca.8f78.rte
devices.scsi.tm.rte
Support Line: clverify states that system needs APARs IX51671 and IX54057. ITEM: BG4024L
Dated: May 1996 Category: N/A
This HTML file was generated 99/06/24~13:30:22
Comments or suggestions?
Contact us