ITEM: BA4154L

The /tmp/cm.log HACMP file keep filling the /tmp filesystem.

ENV: AIX v3.2.5.1, HACMP v3.1.1(U438726)
 Desc: The cm.log file keeps growing out of control(ie. 9+ MB).  Here is 
      an example of the errors that keep being added to the log file:
     
      JIM ERROR (rs232,pid=10700) Illegally formated address '0.0.0.0'
      JIM ERROR (rs232,pid=10700) Illegally formated address '0.0.0.0'
      JIM ERROR (rs232,pid=10700) Illegally formated address '0.0.0.0'
      JIM ERROR (rs232,pid=10700) Strt can't find the adapter to send 
                                  through
      JIM ERROR (rs232,pid=10700) Illegally formated address '0.0.0.0'
      JIM ERROR (rs232,pid=10700) Illegally formated address '0.0.0.0'
      JIM ERROR (rs232,pid=10700) Illegally formated address '0.0.0.0'
      JIM ERROR (rs232,pid=10700) Illegally formated address '0.0.0.0'

Act: These errors in the cm.log point to a problem with the tty
     adapter configuration.  Looked at the ttys and the tty Adapter 
     Identifier fields were not filled in.  The command cllsif also
     showed 0.0.0.0 for the IP address.  Put in the /dev/tty\# entries
     for the tty Adapter Identifier fields of both systems.  

Next Act: After stopping the clstrmgr, adding the tty Adapter Identifiers,
          removing cm.log and restarting clstrmgr the cm.log quit growing.
          The file was recreated, but is no longer growing in size.




Support Line: The /tmp/cm.log HACMP file keep filling the /tmp filesystem. ITEM: BA4154L

Dated: October 1995 Category: N/A

This HTML file was generated 99/06/24~13:30:23

Comments or suggestions?
Contact us