EACCES |
Indicates that an attempt was made to open a device currently opened in Diagnostic mode. |
EACCES |
Indicates that an attempt was made to open a diagnostic session on a device already opened. |
EACCES |
Indicates that an attempt was made to open a device whose parent device is currently opened in Diagnostic mode. |
EACCES |
Indicates that an attempt was made to open a diagnostic session on a device whose child devices are already opened. |
EACCES |
Indicates that a diagnostic ioctl operation was attempted when the device was not in Diagnostic mode. |
EACCES |
Indicates that a daemon ioctl operation was attempted by a process other than the RAS configuration daemon, or the adapter has not been opened by the daemon. |
EBUSY |
Indicates that the target device is reserved by another initiator. |
EBUSY |
Indicates that the other initiator may have outstanding requests queued to the device. |
EBUSY |
Indicates that a device cannot be unconfigured if it is still in use. |
EFAULT |
Indicates that a severe I/O error occurred during an adapter download. |
EINVAL |
Indicates that the read or write subroutine supplied an nbyte parameter that is not an even multiple of the block size. |
EINVAL |
Indicates that an unsupported ioctl operation was attempted. |
EMEDIA |
Indicates that the target device has indicated an unrecovered media error. |
ESOFT |
Indicates that the target device has indicated a recovered media error. |
ENXIO |
Indicates that the ioctl subroutine supplied an invalid parameter. |
ENXIO |
Indicates that a read or write command was attempted beyond the end of the disk. |
EIO |
Indicates that the target device cannot be located or is not responding. |
EIO |
Indicates that the target device has indicated an unrecovered hardware error. |
EPERM |
Indicates that the attempted subroutine requires appropriate authority. |
ETIMEDOUT |
Indicates that an ioctl operation timed out. |
ENOMEM |
Indicates that there is insufficient memory to perform the request. |
ECHILD |
Indicates that there are no more asynchronous events needing processing by the RAS configuration daemon. |
Device-dependent Subroutines for Serial DASD Operations.
Device-Dependent Subroutines for Serial DASD Controller Operations.
Device-Dependent Subroutines for Serial DASD Adapter Operations.