mode.h File

AIX Version 4 Files Reference

mode.h File

Purpose

Defines the interpretation of a file mode.

Description

This version of the operating system supports a 32-bit mode, which is divided into 3 parts. The 16 most significant bits are reserved by the system. The least significant 16 bits define the type of file (S_IFMT) and the permission bits. The 12 permission bits can be changed by using the chmod or chacl subroutine. The file type cannot be changed.

File-Type Bits

The file type determines the operations that can be applied to the file (including implicit operations, such as searching a directory or following a symbolic link). The file type is established when the file is created, and cannot be changed. The following file types are supported:

S_IFDIR	Defines a directory.
S_IFREG	Defines a regular file.
S_IFIFO	Defines a pipe.
S_IFCHR	Defines a character device.
S_IFBLK	Defines a block device.
S_IFLNK	Defines a symbolic link.
S_IFSOCK	Defines a socket.

The S_IFMT format mask constant can be used to mask off a file type from the mode.

File-Attribute Bits

The file-attribute bits affect the interpretation of a particular file. With some restrictions, file attributes can be changed by the owner of a file or by a privileged user. The file-attribute bits are:

Attribute	Description

S_ISUID Bit

setuid

When a process runs a regular file that has the S_ISUID bit set, the effective user ID of the process is set to the owner ID of the file. The setuid attribute can be set only by a process on a trusted path. If the file or its access permissions are altered, the S_ISUID bit is cleared.

S_ISGID (S_ENFMT) Bit

setgid

When a process runs a regular file that has both the S_ISGID bit and the S_IXGRP permission bit set, the effective user ID of the process is set to the group ID of the file. The setgid attribute can be set only by a process on a trusted path. If the owner is establishing this attribute, the group of the file must be the effective group ID or in the supplementary group ID of the process. If the file or its access permissions are altered, the S_ISGID bit is cleared.

enforced locking

If a regular file has the S_ISGID bit set and the S_IXGRP permission bit cleared, locks placed on the file with the lockfx subroutine are enforced locks.

S_IFMPX Bit

multiplexed

A character device with the S_IFMPX attribute bit set is a multiplexed device. This attribute is established when the device is created.

S_ISVTX Bit

sticky

If a directory has the S_SVTX bit set, no processes can link to the files in that directory. Only the owner of the file or the owner of the directory can remove a file in a directory that has this attribute.

S_IXACL Bit

access control list

Any file that has the S_IXACL bit set can have an extended access control list (ACL). Specifying this bit when setting the mode with the chmod command causes the permission bits information in the mode to be ignored. Extended ACL entries are ignored if this bit is cleared. This bit can be implicitly cleared by the chmod subroutine. The /usr/include/sys/acl.h file defines the format of the ACL.

S_ITCB Bit

trusted

Any file that has the S_ITCB bit set is part of the Trusted Computing Base (TCB). Only files in the TCB can acquire privilege on a trusted path. Only files in the TCB are run by the trusted shell (which is invoked with the tsh command). This attribute can be established or cleared only by a process running on the trusted path.

S_IJRNL Bit

journaled

Any file that has the S_IJRNL bit set is defined as a journaled file. Updates to a journaled file are added to a log atomically. All directories and system files have the journaled attribute, which cannot be reset.

File-Permission Bits

The file-permission bits control which processes can perform operations on a file. This includes read, write, and execute bits for the file owner, the file group, and the default. These bits should not be used to set access-control information; the ACL should be used instead. The file-permission bits are:

S_IRWXU	Permits the owner of a file to read, write, and execute the file.
S_IRUSR	Permits the owner of a file to read the file.
S_IREAD	Permits the owner of a file to read the file.
S_IWUSR	Permits the owner of a file to write to the file.
S_IWRITE	Permits the owner of a file to write to the file.
S_IXUSR	Permits the owner of a file to execute the file or to search the file's directory.
S_IEXEC	Permits the owner of a file to execute the file or to search the file's directory.
S_IRWXG	Permits a file's group to read, write, and execute the file.
S_IRGRP	Permits a file's group to read the file.
S_IWGRP	Permits a file's group to write to the file.
S_IXGRP	Permits a file's group to execute the file or to search the file's directory.
S_IRWXO	Permits others to read, write, and execute the file.
S_IROTH	Permits others to read the file.
S_IWOTH	Permits others to write to the file.
S_IXOTH	Permits others to execute the file or to search the file's directory.

Implementation Specifics

This file is part of Base Operating System (BOS) Runtime.

Related Information

The stat.h file, types.h file.

The chmod command, tsh command.

The Header Files Overview, defines header files, describes how they are used, and lists several of the header files for which information is provided in this documentation.