rmfilt Command

AIX Version 4.3 Commands Reference, Volume 4

rmfilt Command

Purpose

Removes a filter rule from the filter table.

Syntax

rmfilt -v 4|6 [-n fid | all]

Description

Use the rmfilt command to remove filter rules from the filter rule table. Only manual filter rules can be removed. Actions done by this command will not take effect in the IP Security subsystem until the mkfilt command is executed.

Flags

-v	IP version of the filter rule you want to remove. Value 4 specifies IP version 4. Value 6 specifies IP version 6.
-n	The ID of the filter rule you want to remove from the filter rule table. For IP version 4, the value of 1 is invalid for this flag, which is a reserved filter rule. If all is specified, all the filter rules (except rule number 1 for IP version 4) will be removed.