[ Previous | Next | Contents | Glossary | Home | Search ]
AIX Version 4.3 System Management Guide: Operating System and Devices

Adding a Disk Using the Hot Removability Feature

The following procedure describes how to turn on and configure a disk using the hot removability feature.

  1. Install the disk in a free slot of the cabinet. For detailed information about the installation procedure, refer to 7013 J Series Service Guide.

  2. Perform the procedure "Power on a removable disk" .

  3. If the disk has no data, add a physical volume to the volume group.

    OR

    If the disk contains data, go to the procedure "Importing or Exporting a Volume Group".


[ Previous | Next | Contents | Glossary | Home | Search ]