File created by Andreas Dilger
LED sequence.
New NIM LEDs
623 - BOS installation program encountered a fatal error.
624 - Control passed to BOS install.
625 - Failure attempting to create a directory in a SPOT that is being used to boot a NIM client over the network.
SP-specific LEDs:
000 - The node is in shutdown mode
001 - The initialization routine leads to a single user mode
762 - Configuration is running for the TB3 SP switch adapter card
83u - Configuration is running for the TB2 SP switch adapter card
980 - Configuration is running for the TB0 SP switch adapter card
99u - The netinstall process for this node has completed
c27 - The boot device returned from the bootinfo -b command is not valid
u00 - Invalid bootp_response specified in install_info file
u01 - Getting boot information
u02 - Configuring the boot network
u03 - tftp of /tftpboot/.install_info file from boot/install server failed
u04 - Expanding .install_info file variables for use in rc.boot
u05 - tftp of /usr/lpp/ssp/install/backup/config.bff file failed
u06 - Starting to setup the display
u07 - Exiting phase 1 network boot
u20 - tftp of the /usr/lpp/ssp/install/backup/dispdskt.bff file failed
u21 - Reconfiguring the network
u22 - Replacing the default network boot ODM cfgrules
u23 - Issuing config manager (cfgmgr)
u24 - Reconfiguring the network
u25 - Issuing config manager again (cfgmgr)
u26 - Configuring the console (cfgcon)
u30 - tftp of the /usr/lpp/ssp/install/backup/instmain.diskette file failed
u31 - Restoring the files in the instmaint.diskette backup file
u32 - Configuring tape drives, if any
u33 - Invoking mk_autoinst_files to create files. Possible corruption of /usr/lpp/ssp/install/bin/config.bff
u34 - Exiting prepare_auto_install routine
u50 - Beginning rc.boot phase 2 - get the boot information and expand the install_info variables
u51 - The node has been recognized as a uni-processor, and bos.rte.up is about to be installed
u52 - The node has been recognized as a SMP node, bos.rte.mp is about to be installed
u53 - Installing the ssp.ha feature on the node
u54 - The installation process has invoked the AIX netinstall program bosmain to install the AIX image
u55 - bosboot failed when creating a bootable image on a SMP node
u56 - Possible problems mounting the /usr filesystem on the client
u57 - Restoring the .config_info file
u59 - Configuring the node using the config_node script
u60 - Creating server_name, server_hostname, reliable_hostname, and cw_name files in /etc/ssp
u61 - tftp of the /etc/SDR_dest_info file from the boot/install server has failed
u62 - Creating the /etc/firstboot file
u63 - tftp of the /usr/lpp/ssp/install/config/script.cust file from the boot/install server has failed
u64 - tftp or execution of the /usr/lpp/ssp/install/config/rc.boot.config file has failed
u65 - The insall/customize/maintenance has been completed and the node is rebooting
u66 - Setting the clock on the node
u67 - Copying kerberos configuration file (/etc/krb.conf) from boot server
u68 - Copying kerberos realms file (/etc/krb.realms) from boot server
u69 - Copying kerberos server key file (/etc/krb_srvtab) from boot server
u70 - Beginning of rc.boot setup
u71 - Start of boot process for a network boot
u72 - Beginning of initialization for rc.boot
u73 - Copying ksrvutil program (/usr/lpp/ssp/kerberos/bin/ksrvutil) to change server keys
u74 - Executing ksrvutil program (/usr/lpp/ssp/kerberos/bin/ksrvutil) to change server keys
u75 - Copying rcmdtgt program (/usr/lpp/ssp/kerberos/bin/rcmdtgt) from boot server
u76 - Copying rsh (kshell client) program (/usr/lpp/ssp/kerberos/bin/rsh) from boot server
u77 - Executing rcmdtgt program (/usr/lpp/ssp/kerberos/bin/rcmdtgt) to get kerberos ticket
u78 - Executing rsh to complete node processing on boot server
u79 - tftp of the files /tftpboot/script.cust and /tftpboot/tuning.cust from the NIM master
u80 - Installing the ssp.clients feature on the node
u81 - Installing the ssp.basic feature on the node
u82 - Installing the ssp.sysctl feature on the node
u83 - Installing the ssp.sysman feature on the node
u84 - Installing the ssp.css feature on the node
u85 - Installing the ssp.jm feature on the node
u86 - Creating the /etc/firstboot file on the node and running the /tftpboot/tuning.cust script
u87 - Running the /tftpboot/script.cust script on the node
u88 - rc.boot has determined that the bootp_response for the node being installed is set to disk, while /etc/bootptab is set for network boot
u89 - The /usr client adapter field has an invalid value in it
u90 - Using the bootinfo command to get the boot information and initialize variables for rc.boot
u91 - Gathering of boot information is complete
u92 - Determining the boot network information
u93 - Issuing ifconfig for the boot network
u94 - The /usr client network is not the boot network. Issuing ifconfig to configure the network to mount /usr
u95 - Boot network configuration is complete
u98 - Starting bosmain for maintenance option
u99 - Invalid bootp_response specified in install_info file
SP node installation LED output:
________ ____________ __________________________________________________
| Time | LED Value | Description |
| (min:se|) | |
|________|____________|__________________________________________________|
| 0:00 | 124 | BIST started a CRC check on the OCS area of |
| | | NVRAM. |
|________|____________|__________________________________________________|
| | 151 | BIST started AIPGM test code. |
|________|____________|__________________________________________________|
| | 214 | Power status register failed. |
|________|____________|__________________________________________________|
| | 219 | Generating RAM POST bit map. |
|________|____________|__________________________________________________|
| | 291 | Running standard I/O POST. |
|________|____________|__________________________________________________|
| | 200 | Attempting IPL with key in secure position. |
|________|____________|__________________________________________________|
| | 102 | BIST started following power-on reset. |
|________|____________|__________________________________________________|
| | 153 | BIST started ACLST test code. |
|________|____________|__________________________________________________|
| 0:30 | 154 | BIST started AST test code. |
|________|____________|__________________________________________________|
| | 100 | BIST completed successfully; control was passed |
| | | to IPL ROS. |
|________|____________|__________________________________________________|
| | 219 | Generating RAM POST bit map. |
|________|____________|__________________________________________________|
| | 292 | Running SCSI POST. |
|________|____________|__________________________________________________|
| 1:00 | 291 | Running standard I/O POST. |
|________|____________|__________________________________________________|
| | 262 | No keyboard connected to the system. |
|________|____________|__________________________________________________|
| | 260 | Displaying information on the display console. |
|________|____________|__________________________________________________|
| 1:30 | 231 | Attempting a normal mode IPL from Ethernet |
| | | specified in IPL ROM. |
|________|____________|__________________________________________________|
| 2:30 | Blank | |
|________|____________|__________________________________________________|
| | 606 | Running the if_config command to bring up |
| | | network interface. |
|________|____________|__________________________________________________|
| | 610 | Attempting to NFS mount a remote file system. |
|________|____________|__________________________________________________|
| | 299 | IPL ROM passed control to the loaded program |
| | | code. |
|________|____________|__________________________________________________|
| | 608 | Attempting to tftp the .info file from client's |
| | | SPOT server. |
|________|____________|__________________________________________________|
| | 612 | Accessing remote configuration files. |
|________|____________|__________________________________________________|
| | 622 | Returning control to the /sbin/rc.boot program. |
|________|____________|__________________________________________________|
| | 520 | Running bus configuration. |
|________|____________|__________________________________________________|
| | 890 | SCSI-2 differential fast/wide adapter. |
|________|____________|__________________________________________________|
| | 620 | Updating special device files. |
|________|____________|__________________________________________________|
| 3:00 | 890 | SCSI-2 differential fast/wide adapter. |
|________|____________|__________________________________________________|
| | 570 | Configuring virtual SCSI devices. |
|________|____________|__________________________________________________|
| 3:30 | 622 | Returning control to the /sbin/rc.boot program |
|________|____________|__________________________________________________|
| 4:00 | 811 | Identifying or configuring processor complex. |
|________|____________|__________________________________________________|
| | Blank | |
|________|____________|__________________________________________________|
| | 570 | Configuring virtual SCSI devices. |
|________|____________|__________________________________________________|
| | 727 | Identifying or configuring unknown asynchronous |
| | | device. |
|________|____________|__________________________________________________|
| | 538 | The configuration manager is invoking a |
| | | configuration method. |
|________|____________|__________________________________________________|
| | 622 | Returning control to the /sbin/rc.boot program. |
|________|____________|__________________________________________________|
| | c40 | Restoring configuration files. |
|________|____________|__________________________________________________|
| 8:00 | c42 | Extracting data from diskette. |
|________|____________|__________________________________________________|
| | c33 | Selecting a tty terminal attached to serial |
| | | ports S1 or S2. |
|________|____________|__________________________________________________|
| | c44 | Initializing installation database with target |
| | | disk info. |
|________|____________|__________________________________________________|
| 8:30 | c46 | Normal installation processing. |
|________|____________|__________________________________________________|
| | Blank | |
|________|____________|__________________________________________________|
| 9:00 | c50 | Creating root volume group on target disks. |
|________|____________|__________________________________________________|
| | c46 | Normal installation processing. |
|________|____________|__________________________________________________|
| 10:30 | c54 | Installing either BOS or additional packages. |
|________|____________|__________________________________________________|
| 19:00 | c52 | Changing from RAM environment to disk |
| | | environment. |
|________|____________|__________________________________________________|
| 21:30 | c46 | Normal installation processing. |
|________|____________|__________________________________________________|
| | 570 | Configuring virtual SCSI devices. |
|________|____________|__________________________________________________|
| 22:00 | c46 | Normal installation processing. |
|________|____________|__________________________________________________|
| | 731 | Identifying or configuring PTY. |
|________|____________|__________________________________________________|
| | 539 | The configuration method has terminated, |
| | | returning to config. |
|________|____________|__________________________________________________|
| | 811 | Identifying or configuring processor complex. |
|________|____________|__________________________________________________|
| | 538 | The configuration manager is invoking a |
| | | configuration method. |
|________|____________|__________________________________________________|
| | 570 | Configuring virtual SCSI devices. |
|________|____________|__________________________________________________|
| 22:30 | Blank | |
|________|____________|__________________________________________________|
| 23:00 | u78 | Running rsh to complete node processing on |
| | | boot/install server. |
|________|____________|__________________________________________________|
| | u60 | Creating /etc/ssp/server_name and updating |
| | | /etc/hosts. |
|________|____________|__________________________________________________|
| | u68 | Copying kerberos realms file from boot/install |
| | | server. |
|________|____________|__________________________________________________|
| | u59 | Running config_node to define adapters. |
|________|____________|__________________________________________________|
| 27:00 | u65 | SSP completing the install/customize/maint. |
| | | Issuing shutdown. |
|________|____________|__________________________________________________|
| 27:30 | c46 | Normal installation processing. |
|________|____________|__________________________________________________|
| 28:00 | 292 | Running SCSI POST. |
|________|____________|__________________________________________________|
| | 298 | Attempting a software IPL. |
|________|____________|__________________________________________________|
| | 291 | Running standard I/O POST. |
|________|____________|__________________________________________________|
| | 299 | IPL ROM passed control to the loaded program |
| | | code. |
|________|____________|__________________________________________________|
| | Blank | |
|________|____________|__________________________________________________|
| | 890 | SCSI-2 differential fast/wide adapter. |
|________|____________|__________________________________________________|
| | 820 | |
|________|____________|__________________________________________________|
| | 538 | The configuration manager is invoking a |
| | | configuration method. |
|________|____________|__________________________________________________|
| | 570 | Configuring Virtual SCSI devices. |
|________|____________|__________________________________________________|
| 29:00 | 551 | Running IPL varyon. |
|________|____________|__________________________________________________|
| | 517 | Mounting client remote file system during |
| | | network IPL. |
|________|____________|__________________________________________________|
| 29:30 | 553 | IPL phase 1 is complete. |
|________|____________|__________________________________________________|
| | 570 | Configuring virtual SCSI devices. |
|________|____________|__________________________________________________|
| | 538 | The configuration manager is invoking a |
| | | configuration method. |
|________|____________|__________________________________________________|
| | c33 | Selecting a tty terminal attached to serial |
| | | ports S1 or S2. |
|________|____________|__________________________________________________|
| 30:00 | Blank | |
|________|____________|__________________________________________________|
| 33:00 | 83u | Running SSP configuration method for TB2 card. |
|________|____________|__________________________________________________|
| 34:00 | 570 | Configuring virtual SCSI devices. |
|________|____________|__________________________________________________|
| | 538 | The configuration manager is invoking a |
| | | configuration method. |
|________|____________|__________________________________________________|
| 34:30 | Blank | |
|________|____________|__________________________________________________|