Error Description Action/ Code Possible Failing FRU ________________________________________________________________________________ 00010000 An error occured during the Processor Card. CPU Card ________________________________________________________________________________ 0001000A Machine Check occured Go to MAP 1540 ________________________________________________________________________________ 0001500x An error occured while erasing the system firmware. CPU Card Firmware update was not completed. ________________________________________________________________________________ 00016000 Bad CRC error - CMOS/NVRAM System Board swap old VPD module onto new System Board. ________________________________________________________________________________ 0001600x CMOS locked when attempting to Turn machine - enable/disable unattended mode or power off and back on Tu back on - set/reset Supervisor/Privilege-Access password or - set/reset Power-On password ________________________________________________________________________________ 00016010 1. System Board Swap old VPD module to new System Board ________________________________________________________________________________ I Will add the rest when I have a minute ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________