/

2 Gigabit Fiber Channel PCI-X
Type 5704 #6239
*
1. Jumper JX1, Pins 1 to 2 only and Jumper JX2, Pins 2 to 3 only
2. Data Link Status LEDs - See below
3. Multimode Fiber LC Connector

Software requirement: AIX 5.1/5.2
CDN Announcement Letter A03-0545
Customer Setup ? Yes: 7025, 7026-B80, 7028, 7311, 7044, 9112
                      No: 7026-6H0/6H1/6M1, 7038, 7039, 7040

- Documentation: PDF Guide SA23-2550
- Microcode Check

DRIVERS: 1) Adapter: devices.pci.df1080f9.rte
                       co-requisites for the above:
                        devices.common.IBM.fc.rte.*
                        devices.pci.df1000f7.com

         2) Adapter Diagnostics devices.pci.df1080f9.diag
                                  pre-requisites for the above:
                                   devices.common.IBM.fc.rte.*

         3) Attached devices:  devices.fcp.disk.rte.*
                               devices.fcp.tape.rte.*
                               devices.fcp.disk.array.*

PARTS:
                            Adapter  00P4297
                       Architecture  PCI-X 1.0a, PCI 2.2
                               Slot  PCI 2.2 64-bit 133-MHz recommended.
                                     PCI 2.1 32-bit 33-MHz

Resource name:  fcsX   X=number
64-bit 133MHz


*
*


Created: July 2003 BJ Croft
Last Updated: July 2003 by BJ Croft