IBM 7332-110 DDS-3 4mm 12GB Cartridge Autoloader

To use the autoloader features of the 7332, you must install the Atape
device driver that you received on a diskette.

The requested drivers can be obtained from the following ftp sites:

NEW ftp://ftp.software.ibm.com/storage/devdrvr/AIX
OLD index.storsys.ibm.com (198.80.6.2) (not updated)

AIX Atape Device Driver and select the version of your choice
Atape Postscript Manual and select IBM_scsi_tape_IUG.ps
README


                IBM 7332-110 4mm DDS-3 Tape Autoloader

   _________________________________     Description               P/N
  | IBM 7332      ________________  |   Autoloader asm.........  59H4168
  | FFC ???      |                | |   Magazine 4-Cartridges..  87G4885
  |        ____  |                | |   Data Cartridge.........  59H3465
  |    _  |____| | ############## | |   Cleaning Cartridge.....  21F8763 20 times
  |   |_| |____| |________________| |   Test Cartridge.........  59H3466
  |_________________________________|   Swab Kit...............  94F7860
                                        Power Supply...........  46G3934
                                        Fan asm................  55F9421
                                        Switch Adress Cable....  74G8181
                                        Address Switch Asm.....  59H4114




                  SCSI Cables:         P/N
             Internal.............    8191223

             System-to-device.......  33F4606 1.5m 8-bit with piggyback connector
                                      70G9858 1m 68-pin Wide SCSI like 7025-F50
                                      8191425
                                      92F2559 1.5m

             Device-to-device......   33F4607 0.6m
                                      31F4222

             SCSI Terminator........  52G4260


  NOTE: This tape drive needs SYSBACK or ADSM software to work with multiple
        cartridge without human intervention.


                                  Nov 10 2000