This is not a 7332 !
This drive is not supported by ADSM !
Horizontal Orientation Vertical Orientation
_________________________________ ______________
| ________________________ | | |
| __| | | | __ |
| | | | | | | | |
| |__|________________________|_ | | ________|__| |
| | | | o | | / \ | || | ||
| | | | o |_| | | | || | ||
| |_|___|__o___ _|_|_____\__ / | ||_______| ||
|__________________________________| || | ||
|| o o o | ||
#6153 - FRU 42H2362 (7027) || | ||
||_______| ||
|| | | ||
||___|___| ||
|| | ||
|| ___ | ||
|| / \ | ||
||| || ||
||_\__ /_|____||
| |
| |
|______________|
#6137 FRU 76H0473
(7025-F30/F40/F50)
Tape Magazine 6-cartridges.. 41H8714
Other cartridges P/N........ See 4mm 4GB DDS2
Options Switches ( 4 in a red block ) MUST be all set to OFF.
Update Dec/6/99
Known problems: mksysb, tar fails
1 - The 8 configuration switches ( not the red ones ) hidden under the
metal plate that slides the drive in its bay. They must be all at
ON except 3 and 4 at OFF. ( RETAIN H137681 H137631 )
2 - Error "... parameter that is not valid".
Some units needs to have their configuration switches 7 and 8 to be put
at OFF.
--------------------
KNOWN PROBLEM:
There are no microcode available for this type of tape on the web or CORE.
Microcode for RS/6000 pSeries should lists 9602.
If the microcode is not 9602 and this is an IBM supplied
tape drive, order a new unit.
DEVICE LOCATION DESCRIPTION
rmt0 04-A0-00-6,0 IBM SCSI 4mm tape drive
Manufacturer................ HP
Machine Type and Model...... C1553A
Device Specific.(Z1)........ 9602 <---- correct
rmt0 04-A0-00-6,0 Other SCSI Tape Drive
Manufacturer................ HP
Machine Type and Model...... C1553A
Device Specific.(Z3)........ 2020 <---- incorrect
. PAGE
Updated: Oct 2002 by Bruno Croft