This page is intended to provide firmware that is intended to be used for very specific situations as identified by the firmware description.

MES orders with features 5605, 5611, or 5584

Memory Migration Considerations – Special considerations for MES orders with features 5605, 5611, or 5584

These features allow the DDR2 memory to be migrated to Power 595 (9119-FHA) from p590 (9119-590), p595 (9119-595) and i595 (9406-595) servers. However they require analysis of the memory on the existing machine prior to the start of the upgrade.

The SSR will need to install and run a special analysis tool on the existing POWER5 machine in order to determine how to proceed with the memory migration. The SF240_370_BP240_224.iso contains the necessary firmware/tool to support this MES. Product Engineering recommends that this firmware/tool is only installed on systems preparing to perform the above MESes.

You must have access to a CD-R or CD-RW drive and software that is capable of creating a CD from an ISO 9660 formated image.

Use your software's feature for creating a CD from an ISO image. Adaptec Easy CD Creator calls this feature "Create CD from CD image". RecordNow! and Nero Burning ROM call this feature "Burn Image". Refer to the help provided with your CD-R software for further assistance.

SF240_370_BP240_224.iso: Created November 21, 2008
MES orders with features 5605, 5611, or 5584 CD-ROM image
59,092,992 bytes