IBM IDE DVD-ROM Drive (Slim) / DROM00205K1


 DATE: March 1, 2006

Table of Contents

IBM IDE DVD-ROM Drive (Slim) / DROM00205K1

1.0 Microcode Change History:

2.0 AIX Requirements:

3.0 Determine the Current Microcode Levels:

4.0 Downloading and Unpacking the RPM File to the Target Server

4.0.1 From the Web

4.0.2 From the Microcode CD-ROM

5.0 Microcode Download Procedure for Optical Device

=====================================================================================

1.0 Microcode Change History:

IBM     DROM00205K1

P733

This is the original f/w level for this drive

 

 

 

2.0 AIX Requirements:

For support: AIX 5.1 ML_04 and above

 

3.0 Determine the Current Microcode Levels:

Before you install the microcode, it is important to determine the microcode level of the Drive installed on the target system. Use the following instructions to read the Microcode Level.

1)  List the optical drives attached to the target systems by typing:
    lsdev -Cc cdrom

2) To check the current microcode level for the optical drive, enter the following command
     lscfg -vl cdX
 Where X is the number associated with the optical drive listed as available in step 1.

Results of command

# lscfg -vl cd1

  cd1              P1/Q1-L0  IDE DVD-ROM Drive

        Manufacturer................IBM

        Machine Type and Model......DROM00205K1   H0

        ROS Level and ID............P733

        Device Specific.(Z0)........058002028F000030                    

               

#

4.0 Downloading and Unpacking the RPM File to the Target Server


4.0.1 From the Web

The user should put the RPM file from the IBM website into the /tmp directory.

The RPM file for this microcode update is called ibm-ide-dvdrom.drom00205K1-P733.rpm

 

Once the file is in /tmp directory, then to unpack the file by executing following commands:
        rpm -ihv --ignoreos ibm-ide-dvdrom.drom00205K1-P733.rpm

The microcode files will be placed in the /etc/microcode/ directory.

4.0.2 From the Microcode CD-ROM

The RPM packaged microcode files should be located in the "/microcode/RPM"

If the user mounts the CD-ROM disc in the /mnt directory, then execute the following commands to unpack the microcode.
            cd /mnt/microcode/RPM

rpm -ihv --ignoreos ibm-ide-dvdrom.drom00205K1-P733.rpm

 

The microcode files will be copied to "/etc/microcode". 

Notes:

 - "/etc/microcode" is a symbolic link to "/usr/lib/microcode".
 - If permission does not allow the copy to the above stated directory
                  or file then the user will be prompted for a new location.

 

5.0 Microcode Download Procedure for Optical Device

NOTE: Please save current and older versions of the microcode update files in case you need to restore your system.

Please verify the file size and checksum of the raw microcode files in /etc/microcode/.

To check file size, type these next two commands into the AIX prompt:
ls -l IBM-DROM00205K.P733        File size = 153880

To determine the checksum type these commands into the AIX prompt:
sum IBM-DROM00205K.P733        check sum = 53453

Procedure:
1. Stop all applications and un-mount any file system that is installed on the drive.  Media does not have to be removed for the update process to take place.


2. Enter Diagnostics by typing the diag command into the prompt

            diag

3. The first screen tells you about Diagnostics.  After reading this screen press <enter> to continue

 

4. Arrow down to the Task Selection is highlighted and press <enter>

 

5. Arrow down to the Microcode Tasks and press <enter>.  (Older versions of the Diagnostic utility do not list Microcode Tasks as an option.  If this option is not listed, just skip this step and proceed to step 6. )

 

6. Arrow down to the Download Microcode is highlighted and press <enter>.

           
7. Select all of the IDE DVD-ROM Drive that needs to be updated from the list of devices by pressing <enter>. To commit to the next step, Press "F7".

8. Select "/etc/microcode" and press <enter>.

9. A dialogue box may display on screen if the /etc/microcode doesn’t contain the current microcode found on the device. This is just a warning screen and if the microcode files have the same sum and file size as what is described above, then the this process should work.  Also as a last resort, the drive will reject any corrupt microcode trying to be loaded on it.  Press <enter> to continue.

10. An "M" will be displayed next to the latest level of microcode in the /etc/microcode directory.  Select that level and press <enter>.

11. The following message will appear on the screen when download is completed: "Microcode download complete successfully.  The current microcode level for the device cd# is .....  Please run diagnostics on the drive to ensure that it is functioning properly."

12. Verify the microcode levels by repeating process 3.0 Determining Current Microcode Levels.


13. Run diagnostics to make sure the devices are in working order.