01SF225_096_096 Adds support for 1.9 GHz processors on i5 Model 570 New function. None. Adds code to notify the user when the VPD card is not in its original system, and to prevent that system from booting. New function. None. Adds support for i5/OS hosting virtual Linux and AIX partitions on i5 systems that are not managed by an HMC. New function. None. Adds support for F/C 7910 on model 575 systems the switch network interface (SNI) adapter, which provides the interface to the pSeries high performance switch (HPS). New function. None. Adds support for F/C 7817 on models 590 and 595, the switch network interface (SNI) adapter, which provides the interface to the pSeries high performance switch (HPS). New function. None. Adds support for concurrent firmware maintenance on systems managed by an HMC. New function. None. Adds support for 32GB memory cards on models 590 and 595. New function. None. p5 and i5 models 590 and 595: LEDs on GX bus adapter cards remain on after the node is powered off. LIC code updated. None. The service processor is not able to place a "call home" through a modem. LIC code updated to correct the data stream sent. None. On model 575, and models 590 and 595: a firmware upgrade from SF222_075 to SF225_096 fails with error code ACT01724 on the HMC. LIC code updated None. Corrects a problem that causes the default boot list and the stored boot list to be swapped in the system management services (SMS) code when booting an AIX or Linux partition. LIC code updated None. Corrects a highly intermittent problem that causes the service processor to perform a dump when an SRC is displayed on the control panel. LIC code updated. None. On model 590 and 595 systems, updates the firmware so that the system will continue to boot when certain types of failures occur on bus adapter cards. LIC code updated. Replace the failing hardware. Corrects a problem on model 590 and 595 systems which caused a reboot to fail with error code B7006900 under certain conditions. LIC code updated. Power down system and re-IPL. If the problem does not recreate after the power cycle, then this problem is resolved. Otherwise, debug B7006900 by the normal means. Corrects a problem with moving a CD-ROM device between two logical partitions using DLPAR commands on the HMC. LIC code updated. None. p5 and i5 model 570: Corrects a problem a that causes a DMA_ERR with error code 10000003 on the integrated Ethernet port. LIC code updated. None. DS8000 storage subsystem: multiple firmware fixes. LIC code updated. None. Corrects a problem that causes the system clock to revert to December 31, 1969 and the system to crash with error code B7000103. LIC code updated. None. On model 590 systems, corrects a problem that keeps large configurations (12 or more I/O drawers with both planars installed) from booting. Updated LIC to allocate more memory for certain processes. None.