Instructions for installing firmware on a server without an HMC attached:
The RPM file provided on this web site is only for use when installing server firmware on a pSeries p5 Server using the AIX or Linux Operating System on a server without an HMC attached.
To access install instructions go to this URL http://publib.boulder.ibm.com/eserver/
and follow the steps shown below:
Select your country, then under Hardware select your language.
In the left-hand panel, select
--> Service and support
--> Customer service and support
--> Getting fixes
--> Firmware (Licensed Internal Code) fixes
--> Scenarios: Firmware (Licensed Internal Code) fixes--> Get
firmware fixes without an HMC
Attention:
On machine types 9119-590/595 or 9406-595, you should power
off the managed system via the HMC before attempting a Licensed Internal Code update.
On machine types 9119-590/595 or 9406-595, you should ensure that there are no outstanding serviceable events showing on the Service Focal Point before starting the
Licensed Internal Code update.
On machine types 9119-590/595 or 9406-595, you should verify that you have good network connections between the Hardware Management Console and the power and service processor subsystems.
You can verify your network connections by running the following HMC command from an rsh window:
lssysconn -r all
Below is an example output from the lssysconn command. It shows two connections have "state = no connection" problems.
If you see "state = no connection" when running the lssysconn command you should contact support to correct the problem
before starting a Licensed Internal code update:
resource_type=frame,type_model_serial_num=9458-100*918000X,side=a,ipaddr=192.168.253.253,state=No Connection
resource_type=frame,type_model_serial_num=9458-100*918000X,side=b,ipaddr=192.168.254.251,state=No Connection
resource_type=sys,type_model_serial_num=9119-595*512884E,sp=primary,ipaddr=192.168.255.250,state=Connected
resource_type=sys,type_model_serial_num=9119-595*512884E,sp=backup,ipaddr=192.168.252.255,state=Connected
If you only want to update your firmware and no I/O microcode, you can
download this p5and
i5 iso
image and create a CD-ROM to use with your HMC. The CD contains
both the server and
power subsystem firmware images. If your HMC is internet
connected, we recommend you update firmware using the Internet
connection.
The method used to install a firmware update will depend on the release
level of firmware which is currently installed on your system. The
release level (also known as the EC level) can be determined by
the prefix of the update's filename.
Example: 01SFXXX_YYY_ZZZ
Where XXX = EC level or release level
If this update will NOT require a release level update, follow the
steps provided in the "Instructions for updating to a new fix level"
section below.
If this update will require a release
level update, follow the steps provided in the "Instructions for
updating to a new release
level" section below.
Instructions for updating to a new
fix level:
Example: Level 01SF222_075_075 is currently installed and you are attempting to install level 01SF222_081_081.
To access install instructions go to this URL http://publib.boulder.ibm.com/eserver/
and follow the steps shown below:Select your country, then under Hardware select your language.
In the left-hand panel, select
--> Service and support
--> Customer service and support
--> Getting fixes
--> Firmware (Licensed Internal Code) fixes
--> Scenarios: Firmware (Licensed Internal Code) fixes
--> Scenario: Get server and power subsystem firmware fixes with an HMC
Instructions for updating to a new
release level
Example: Level 01SF220_051_051 is currently installed and you are attempting to install level 01SF222_081_081.
Note: this method will require that the update be performed using CD media. The CD contains both the server andand follow the steps shown below:
Select your country, then under Hardware select your language.
In the left-hand panel, select
--> Service and support
--> Customer service and support
--> Getting fixes
--> Firmware (Licensed Internal Code) fixes
--> Managing Firmware (Licensed Internal Code) fixes
--> Upgrade to a new firmware (Licensed Internal Code) release
--> Upgrading to a new firmware (Licensed Internal Code) release with
an HMC
| 01SF222_081_081 Impact: Function Severity: Hiper | |||
|---|---|---|---|
| Base 01SF222_079_079 | |||
| Defect | Description | Conclusion | Circumvention |
| MB0090x | SP2: B7000602 after Inband upgrade | Update Licensed Internal Code. | None. |
| 01SF222_079_079 | |||
|---|---|---|---|
| Base 01SF222_078_078 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00906 | LIC_INCORROUT IOA failure : adapter shows fscsi errors in AIX | Update Licensed Internal Code. | None. |
| 01SF222_078_078 | |||
|---|---|---|---|
| Base 01SF222_077_077 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00895 | Error B181F63B. | Update Licensed Internal Code. | None. |
| 01SF222_077_077 | |||
|---|---|---|---|
| Base 01SF222_075_075 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00875 | The HMC will get a un-recoverable SRC when attempting to extract platform dump data if the fsp is not in the terminated or runtime states. | Update Licensed Internal Code. | None. |
| MB00876 | B200813A SRC spotted in Error Logs. | Update Licensed Internal Code. | None. |
| MB00877 | The failing address callout by PRD when a memory error occurs could be incorrect. | Update Licensed Internal Code. | Replace all DIMMs when a memory error is identified instead of the callout. The DIMMs that need to be replaced are system/platform dependent. |
| MB00878 | When 2 (or more) nodes are sharing the same IO towers and one node detects an internal failure a second node may eventually lose the IO towers and the node also goes down. | Update Licensed Internal Code. | None. |
| MB00879 | The correct memory FRU may not be called out when a memory failure occurs. | Update Licensed Internal Code. | None. |
| MB00880 | Field symptom that platform dump may run out of space. | Update Licensed Internal Code. | None. |
| MB00881 | IPL "hangs" in the memdiags step of the IPL if a UE is found. | Update Licensed Internal Code. | None. |
| MB00882 | Fix Memory Leak in FSP. | Update Licensed Internal Code. | None. |
| MB00884 | The LEDs on the I/O drawers will not identify or rollup to the enclosure or the frame. | Update Licensed Internal Code. | None. |
| MB00885 | Add hardware callouts for B181F2DE. | Update Licensed Internal Code. | None. |
| MB00888 | The FSP could generate error logs every few seconds. when attempting to service a recoverable CEC HW error on systems that have processors with no memory installed behind them. | Update Licensed Internal Code. | None. |
| MB00890 | The current callout for and 1100871X does not call out a DCA problem. | Update Licensed Internal Code. | None. |
| MB00891 | After the reboot the fspremote tool hangs the fsp ipl. | Update Licensed Internal Code. | None. |
| MB00872 | A reserved-uninitialized entry was found in the AIX device tree when there should not be. | Update Licensed Internal Code. | None. |
| MB00873 | Certain system configurations require Memory on Demand support. | Update Licensed Internal Code. | None. |
| 01SF222_075_075 Impact: Function Severity: Hiper | |||
|---|---|---|---|
| Base 01SF222_074_074 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00834 | ASM option to program system vpd keywords fix | Update Licensed Internal Code. | None. |
| 01SF222_074_074 | |||
|---|---|---|---|
| Base 01SF222_073_073 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00788 | When the system is powered on, the front panel LED continues to blink rather than going on solidly. | Update Licensed Internal Code. | None. |
| MB00789 | Enhanced FRU isolation. | Updated Licensed Internal Code. | None. |
| MB00791 | Serial console unresponsive following service processor reset/reload | Update Licensed Internal Code. | None. |
| MB00793 | For 590/595, resolved issue with System Attention LED not being activated when a component identification indicator was active. | Updated Licensed Internal Code. | None |
| MB00796 | Improved error data and Platform dump data collection | Update Licensed Internal Code. | None |
| MB00797 | 590/595 Only: IPL failure if primary Service Processor fails during system power off. | Update Licensed Internal Code. | None |
| MB00803 | Call home fails to attempt all destinations if the first location to succeed. | Update Licensed Internal Code. | None. |
| MB00804 | 590/595 Only: Corrects condition where one of the BPC's in a redundant pair will not become available after a code update. | Update Licensed Internal Code. | None |
| MB00811 | Corrected condition preventing System attention LED from being turned off after a failure is resolved. | Update Licensed Internal Code. | None |
| MB00813 | Provide correct information for cases where Location Codes had the incorrect values. | Update Licensed Internal Code. | None |
| MB00814 | Improved error recovery when updating system firmware from the HMC. | Update Licensed Internal Code. | None. |
| MB00819 | System Fails to re-IPL when dump date gathered exceeds file space. | Update Licensed Internal Code | None |
| MB00825 | Loss of AC power as the Service Processor is rebooting during a microcoode update can cause unrecoverable corruption of the Service Processor's code which will require that it be replaced. Op panel repeatedly displays B18172** or B15172**. Systems without Op-panel will show No-Connection on the HMC GUI. | Update Licensed Internal code. | None |
| MB00826 | Prevent condition where service processor may reset on a two frame 59x System. | Update Licensed Internal code. | None |
| 01SF222_073_073 | |||
|---|---|---|---|
| Base 01SF222_071_071 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00777 | 590/595 Only: Resolved erroneous reporting of reporting of faults relating to thermal monitoring, fan control, or communications problems between power controllers. | Update Licensed Internal Code. | None |
| MB00778 | 590/595 Only: IPL Failure due to communication problems between power controllers within the power commuincation network. | Update Licensed Internal Code. | None |
| MB00779 | Communication problem between system and HMC that results in hung Virtual Processors. | Update Licensed Internal Code. | None |
| MB00782 | System is unable to dynamically deallocate 8GB DIMM and continue to boot when un uncorrectable error is detected during boot. | Update Licensed Internal Code. | None |
| MB00732 | Displaying CEC properties through Hardware Management Console fails for iSeries Integrated xSeries Adapters. |
Update Licensed Internal Code. | None. |
| MB00737 | iSeries partition power down hang occurs if system loses state of data traffic on the HSL Opticonnect. | Update Licensed Internal Code. | None. |
| MB00755 | System fails to quiesce properly or hangs during run-time due to a failed processor. | Update Licensed Internal Code. | None. |
| MB00757 | Corrects condition where unreturned Trial Capacity on Demand memory is incorrectly reported as unreturned On/Off COD Memory when the trial period has expired. | Update Licensed Internal code. | None |
| MB00762 | Improve IPL Performance when IPLing a large number of partitions at the same time. | Update Licensed Internal code. | None. |
| MB00765 | iSeries only: With a UPS configured, message "CPI0961 UPS No Longer Attached" is generated six hours after an IPL. | Update Licensed Internal Code. | None. |
| MB00769 | A partition's time appears to gain or lose time following a system IPL. This drift is in the range of 15 seconds per month. |
Update Licensed Internal Code. | None. |
| MB00773 | Support i5OS on pSeries. | Update Licensed Internal Code. | None |
| MB00739 | If SMS option 5 "Default Boot List" is selected when booting, the machine will boot off of the stored boot list (option 6) instead of the default list. | Update Licensed Internal Code. | None. |
| 01SF220_071_071 | |||
|---|---|---|---|
| Base 01SF220_051_051 | |||
| Defect | Description | Conclusion | Circumvention |
| 01SF220_051_051 Impact: Function Severity: Hiper | |||
|---|---|---|---|
| Base 01SF220_050_050 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00686 | Partition fails to reboot following snoop string detection | Licensed internal code changed | None. |
| MB00687 | A timing problem as been identified in the power supply. A 11007120 service code may be posted. | Licensed internal code changed | None. |
| MB00688 | SRC B201E0AA found in platform error log | Licensed Internal Code Changed | None. |
| MB00694 | The Utility Failure detection may not report correctly to the host partitions. | Licensed internal code changed | None. |
| MB00693 | Power code may fail to allow the system to initialize. | Licensed internal code changed | None. |
| 01SF220_050_050 | |||
|---|---|---|---|
| Base 01SF220_049_049 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00679 | IPL fails with an SRC of B1xxF660. | Licensed internal code changed | None. |
| MB00680 | Error code B155B058 may incorrectly tell you to replace the FSP | Licensed Internal Code Changed | None. |
| MB00682 | Premature temperature warnings may be posted. | Licensed Internal Code Changed | None. |
| MB00653 | IPLing one partition participating in HSL Opticonnect causes HSL Opticonnect on other partitions to fail. | Licensed internal code changed | None. |
| MB00672 | Tasks may loop processing machine check interrupts. | Licensed internal code changed | None. |
| MB00674 | Vital Product Data in I/O drawers programmed by legacy pSeries hardware is not recognized by current hardware. | Licensed internal code changed | None. |
| MB00675 | HMC went into a no connect state after attempting to re-IPL partition. | Licensed internal code changed | None. |
| MB00676 | System does not recover following a reset/reload | Licensed internal code changed | None. |
| MB00678 | System fails with SRC B181E500 after tower switch occurrs. | Licensed internal code changed | None. |
| 01SF220_049_049 Impact: Function Severity: Hiper | |||
|---|---|---|---|
| Base 01SF220_048_048 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00608 | Incorrect processor time base frequency possible on RPA partitions. |
Licensed Internal Code Changed | None. |
| MB00611 | The IPL of a system connected in an HSL Opticonnect cluster
may hang at SRCC7004080. |
Licensed Internal Code Changed | None. |
| MB00612 | Adapter descriptions displayed on HMC are incorrect after resources are physically moved. | Licensed Internal Code Changed | None. |
| MB00613 | System profile fails to activate | Licensed Internal Code Changed | None. |
| MB00614 | Reserve Processor request gets started successfully but the processors are not present in the Shared Pool. | Licensed Internal Code Changed | None. |
| MB00615 | Systems participating in an HSL Opticonnect cluster with 3 systems on the same HSL ring may not connect. | Licensed Interal Code Changed | None. |
| MB00618 | Resolved potential cause for system hang at checkpoint C7004078 when HSL Opticonnect starts. | Licensed Internal Code Changed | None. |
| MB00629 | Corrected truncated serial number information displayed by lscfg command for I/O drawers or towers. | Licensed Internal Code Changed | None. |
| MB00630 | Profile activation may fail when changing partition max memory. | Licensed Internal Code Changed | None. |
| MB00631 | The server connection status displayed by the Server and Partition Management utility on the Hardware Management Console goes to Incomplete after a concurrent tower move. |
Licensed Internal Code Changed | None. |
| MB00634 | A deadlock can occur causing console to not be able to comunicate with system. | Licensed Internal Code Changed | None. |
| MB00635 | Opticonnect HSL links are not marked failed correctly when an optical cable is removed. | Licensed Internal Code Changed | None. |
| MB00636 | Corrected potential cause for IPL hang at checkpoint C700406E | Licensed Internal Code Changed | None. |
| MB00639 | Reserve CoD menus incorrectly display maximum number of processors supported instead of number which are physically installed | Licensed Internal Code Changed | None. |
| MB00652 | Corrected potential cause for HMC Console going to incomplete state. | Licensed Internal Code Changed | None. |
| MB00659 | Advanced POWER Virtualization: Current Shared Procs allowed to Violate Min and Max rules. | Licensed Internal Code Changed | None. |
| MB00660 | OptiConnect High-Speed link (HSL) speeds may be set incorrectly. | Licensed Internal Code Changed | None. |
| MB00661 | OptiConnect High-Speed link (HSL) links fail to recover after cable replugged | Licensed Internal Code Changed | None. |
| MB00603 | IBM 4758 PCI Cryptographic Coprocessor does not identify in which slot is is physically plugged. | Licensed Internal Code Changed | None. |
| MB00605 | Linux partition was failed to boot with error BA210000. | Licensed Internal Code Changed | None. |
| MB00638 | Linux partitions boot slowly from Virtual SCSI. | Licensed Internal Code Changed | None. |
| 471504 | UPS detection is intermittent | Licensed Internal Code Changed | None. |
| 469391 | Cannot connect to ASM menus via network interface | Licensed Internal Code Changed | None. |
| 471583 | Improved FRU isolation for error B181FB53 | Licensed Internal Code Changed | None. |
| 471703 | B181F23E on IPL with missing SMP cable | Licensed Internal Code Changed | None. |
| 472017 | ASM TTY interface hangs when web interface has non-English language selected | Licensed Internal Code Changed | None. |
| 475594 | Serial ports not functional of p570 systems equipped with multiple processor drawers (8, 12 and 16 way systems) | Licensed Internal Code Changed | None. |
| 474917 | Corrected cause for false cooling fan faults when system in standby. (Affects 9111 systems only) | Licensed Internal Code Changed | None. |
| 473413 | Improved FRU isolation for error B123E500 | Licensed Internal Code Changed | None. |
| 01SF220_048_048 | |||
|---|---|---|---|
| Base 01SF220_047_047 | |||
| Defect | Description | Conclusion | Circumvention |
| 475379 | B181F7BB error |
Licensed Internal Code Changed | None. |
| 472934 | B1818A09 after power problem | Licensed Internal Code Changed | None. |
| 01SF220_047_047 | |||
|---|---|---|---|
| Base 01SF220_046_046 | |||
| Defect | Description | Conclusion | Circumvention |
| 01SF220_046_046 Impact: Function Severity: Hiper | |||
|---|---|---|---|
| Base 01SF220_045_045 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00624 | If an ethernet cable is not plugged into the service processor port, the service processor may not reach standby because the webserver dies causing the service processor to reboot and then hang. | Licensed Internal Code Changed | None. |
| 01SF220_045_045 | |||
|---|---|---|---|
| Base 01SF220_044_044 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00620 | Error logs are being incorrectly created during firmware downloads to I/O towers. | Licensed Internal Code Changed | None. |
| 01SF220_044_044 | |||
|---|---|---|---|
| Base 01SF220_043_043 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00579 | Dynamic memory remove from a partition fails. | Licensed Internal Code Changed | None. |
| MB00580 | Concurrent replace of an IOP fails. | Licensed Internal Code Changed | None. |
| MB00581 | A logical partition exhibits time-of-day drift across a system IPL. | Licensed Internal Code Changed | None. |
| MB00582 | Reserve Processors for Capacity On Demand are supposed to be idle until called upon for partition workloads. In some cases, all the reserved processors were put into use right away when they were not needed. | Licensed Internal Code Changed | None. |
| MB00583 | A Trial CoD activation may be accepted while there are unreturned Trial resources. |
Licensed Internal Code Changed | None. |
| MB00584 | CoD history log entries are not being produced when Trial CoD expiration results in unreturned resources or when unreturned Trial or On/Off resources have all been reclaimed. | Licensed Internal Code Changed | None. |
| MB00585 | Confirmation of a Capacity on Demand code for Trial resources may not work correctly depending on the number of available resources for conversion to Trial resources. | Licensed Internal Code Changed | None. |
| MB00586 | After replacement of card, unreturned CoD resources were reported as unreturned Trial instead of unreturned On/Off. | Licensed Internal Code Changed | None. |
| MB00587 | HMC displayed fields for Capacity on Demand memory amounts total to more memory than is installed in the server. | Licensed Internal Code Changed | None. |
| MB00588 | Entering an On/Off CoD termination code while there were unreturned On/Off CoD resources resulted in an extended error code of 0x'200A', which means that an On/Off request is active, rather than an error code of 0x'2018', which means the key failed because of unreturned resources. | Licensed Internal Code Changed | None. |
| MB00589 | After activation and expiration of On/Off Processor resources, the entitled number of resources that LPAR should allow is not correct. | Licensed Internal Code Changed | None. |
| MB00593 | After a PCI bus error occurs that would require the PCI bus to be reset and recovered, about 2 seconds after the error occur, other IO error events may be received by the partition. | Licensed Internal Code Changed | None. |
| MB00594 | Error log ID not the same for error entries from the same I/O error. | Licensed Internal Code Changed | None. |
| MB00595 | Hardware recovery on an AIX or LINUX system does not always re-enable interrupts leaving the devices in a non-functional state. | Licensed Internal Code Changed | None. |
| MB00596 | Tower concurrent maintenence and DLPAR of slot holding an IOP is failing. | Licensed Internal Code Changed | None. |
| MB00597 | The system may become unresponsive. | Licensed Internal Code Changed | None. |
| MB00590 | Error adding a cpu. | Licensed Internal Code Changed | None. |
| MB00591 | VSCSI Disk not showing up. | Licensed Internal Code Changed | None. |
| MB00592 | DIAG CD not IPLing in Slave CD/DVD Slot. | Licensed Internal Code Changed | None. |
| 01SF220_043_043 Impact: Usability Severity: Hiper | |||
|---|---|---|---|
| Base 01SF220_041_041 | |||
| Defect | Description | Conclusion | Circumvention |
| MB00573 | Hmc may not connect to system. | Licensed Internal Code Changed | None. |
| MB00576 | System terminating with a A700xxxx error code after a reset/reload of the service processor. | Licensed Internal Code Changed | None. |
| MB00575 | Increase resources in order to allow the use of more I/O adapters in a large configuration. | Licensed Internal Code Changed | None. |
| 01SF220_041_041 | |||
|---|---|---|---|
| Base 01SF220_041_041 | |||
| Defect | Description | Conclusion | Circumvention |
| 9A77028 | New firmware release | Licensed Internal Code Changed | N/A |