|
4.841 bytes |
Service Hints & Tips |
Document ID: COBN-3H8CAF |
TP 380,385 - Power management features
Applicable to: World-Wide
Power Management Features
Three power management modes are provided by the computer to reduce power consumption and prolong battery power.
Standby Mode
When in standby mode the following occurs:
The LCD backlight turns off.
The hard disk motor stops.
Events that cause the computer to enter standby mode:
Standby requested by the Fn key.( Fn+ F3)
No activity under auto-standby enabled by the ThinkPad Features program.
Events that cause the computer to exit or resume standby mode:
(Resume) Any key operation.
Suspend Mode
When in suspend mode, the following, in addition to the three actions of standby mode, occur:
The LCD is powered-off.
The hard disk is powered-off.
The CPU is stopped.
Notes:
1. In the ThinkPad Features Program, the computer can be set to "Will not suspend even if LCD is closed".
2. When the computer is powered with ac power and is used with one of the communication PC cards, the computer enters standby mode ; the PC card and application program remain active.
3. The computer cannot enter suspend mode whilea communication link is running.
Events that cause the computer to enter suspend mode:
Suspend mode is requested by the Fn key ( Fn+ F4 ).
The LCD is closed.
The specified time has elapsed from the last operation with the keyboard, mouse, hard disk drive, parallel connector, or diskette drive; or the AC Adapter is plugged in. The time is specified by Suspend Timer in the ThinkPad Features program.
The battery condition is low. The battery power indicator blinks orange.
Either the PS2 OFF or PS2 SUSpend command is set in the ThinkPad Features program.
Events that cause the computer to exit or resume suspend mode:
(Resume) The LCD is opened.
(Resume) The real time clock alarm is signaled.
(Resume) The ring indicator (RI) is signaled by a serial or PCMCIA device.
(Resume) The Fn key is pressed.
(Exit) Timer conditions are satisfied for entering hibernation mode.
Hibernation Mode
When in hibernation mode, the following occurs:
The system status, RAM, VRAM, and setup data are stored on the hard disk.
The system is powered-off.
Notes:
The computer cannot enter hibernation mode when the computer is powered with ac power and a communication PC card is used.
Events that cause the computer to enter hibernation mode:
Hibernation mode is requested by the Fn key ( Fn+ F12 ).
Timer conditions are satisfied in suspend mode.
A critical low battery condition occurs.
The PS2 HIB ernation command is set in the ThinkPad Features program.
Event that causes the computer to exit hibernation mode.
The power-on switch is operated.
When power is turned on, the hibernation history in the boot record on the hard
disk is recognized and system status is restored from the hard disk to resume operation.
|
Search Keywords |
| |
|
Hint Category |
General Information | |
|
Date Created |
19-05-97 | |
|
Last Updated |
06-05-98 | |
|
Revision Date |
30-04-99 | |
|
Brand |
IBM ThinkPad | |
|
Product Family |
ThinkPad 380, ThinkPad 380D, ThinkPad 380E, ThinkPad 380ED, ThinkPad 380XD, ThinkPad 385D, ThinkPad 385E, ThinkPad 385ED, ThinkPad 385XD | |
|
Machine Type |
2635 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |