|
28.962 bytes |
Service Hints & Tips |
Document ID: COBN-3G5CYE |
Aptiva - 2162 Removals and replacements - System board
Applicable to: World-Wide
2090 - System Board
Remove any adapter cards (2035).
Remove the Media Console host card (2035).
Remove the Riser card (2045).
Disconnect any cables necessary for removal.
Remove any memory (DIMM) (2050) if applicable.
Remove any added video memory (2056) if applicable.
Remove any added cache memory (2055) if applicable.
Remove the processor (2060).
Notes:
1. Be certain to reinstall the processor, SIMMs, video memory, and cache memory in the new system
board if applicable.
2. When reinstalling a new system board, push the board to the rear and place it over the front locating pin
prior to installing the screws.
3. Run the Setup Utility after changing the system board.
|
Search Keywords |
| |
|
Hint Category |
Hardware Installation/Configuration, System Boards | |
|
Date Created |
14-04-97 | |
|
Last Updated |
11-03-99 | |
|
Revision Date |
11-03-2000 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2162 | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |