|
3.451 bytes |
Service Hints & Tips |
Document ID: DETR-3TARM9 |
Aptiva - 2144/2168 (SL-F/H/I) Type 1 Processor type settings
Applicable to: World-Wide
Processor Type Settings - Type F-1, H-1, I-1:
When installing an upgrade processor, make sure the system board processor jumpers are set as shown below.
|
Processor |
JP23 |
JP24 |
JP25 |
|
486DX2-66 |
1-2,3-4 |
2-3 |
Open |
|
P24T |
1-2,3-4 |
1-2,4-5 |
1-2,3-4 |
|
Processor |
JP38 |
JP39 |
JP40 |
|
486DX2-66 |
1-2 |
Open |
Open |
|
P24T |
2-3 |
3-4,5-6 |
1-2 |
Figure 1-2. Processor Type Settings - Type I -1
|
Search Keywords |
| |
|
Hint Category |
Hardware Installation/Configuration, Jumper/Switch Settings, Processors, System Boards | |
|
Date Created |
04-10-96 | |
|
Last Updated |
23-03-99 | |
|
Revision Date |
23-03-2000 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2144, 2168 | |
|
Model |
P30; 2R0; 120; 121; 123; 131; 132; 133; 141; 142; 152; 154; 161; 162; 163; 171; 172; 182; L11; L15; L16; K25; K26; L33; K33; L43; K43; L35; K35; L45; K45; KU5; L55; K55; L65; K65; L66; K66; U11; U15; U16; U33; U43; U35; U45; U55; U65; U66; X17; X27; X37; X47; Y17; Y27. Y37; Y47; Z17; Z27; Z37; Z47; S20; S50; S55; S65; S64; S74; S75; W37; W47 | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |