|
2.572 bytes |
Service Hints & Tips |
Document ID: JBAR-3VJMBV |
IBM IntelliStation/IBM PC - IDE hard file not seen in Windows NT 3.51 SCSI configuration
Applicable to: World-Wide
SYMPTOM:
After installing both IDE and SCSI hard files, the IDE hard file is not recognized after installing Windows NT 3.51.
PROBLEM ISOLATION AIDS:
This tip may apply to all models of IBM PC and IntelliStation systems configured in the following manner:
1. A SCSI hard file is installed as the bootable drive C:>.
2. An IDE hard file is installed as a secondary drive.
3. WindowsNT 3.51 is then installed on the system.
FIX:
After completing the installation, "Atdisk" must be started via Control Panel, Devices:
1. In the "Main" folder, double click Control Panel icon.
2. Double click the Devices icon.
3. Scroll down the devices list and highlight "Atdisk."
4. Click on Startup, and set the startup type to System.
5. Save the changes and restart Windows NT.
Windows and Windows NT are trademarks of Microsoft Corporation.
SAS KEYWORDS:
PSY2 PSY2FDSK CDT CDTFDSK
PWS PWSFDSK D/T6275 D/T6285
NT3.51 UNCLASSIFIED 93250
|
Search Keywords |
| |
|
Hint Category |
Retain, SCSI, Windows NT | |
|
Date Created |
17-06-98 | |
|
Last Updated |
18-06-98 | |
|
Revision Date |
17-06-99 | |
|
Brand |
IBM IntelliStation, IBM PC | |
|
Product Family |
M Pro, Z Pro, E Pro, PC 100, PC 140, PC 300GL, PC 300XL, PC 300PL, PC 330, PC 340, PC 350, PC 360, PC 365, PC 730, PC 750 | |
|
Machine Type |
6888, 6889, 6898, 6899, 6893, 6271, 6281, 6260, 6272, 6275, 6282, 6285, 6284, 6561, 6591, 6588, 6562, 6592, 6862, 6892, 6571, 6573, 6575, 6576, 6577, 6560, 6581, 6583, 6585, 6586, 6587, 6598, 6589, 6875, 6876, 6877, 6885, 6886 | |
|
Model |
various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H163953 | |
|
Reverse Doclinks |