6.276 bytes

Service Hints & Tips

Document ID: LWIK-3NZMEB

TP 380,385,560X,770 - Installation of audio drivers for DOS and Windows 3.1x

Applicable to: World-Wide

Installation Instructions for DOS
1. Start DOS.
2. Insert the Audio Features Diskette for DOS/Windows 3.1 into the diskette drive.
3. Type A:\ and press Enter.
4. Type Install and press Enter.
5. After it is complete, you will need to restart the computer for the changes to take affect.

Installation Instructions for Windows
1. Start Windows 3.1.
2. Select File on the Program Manager window.
3. Select Run... from the pull-down menu.
4. Insert the Audio Features Diskette for DOS/Windows 3.1 into the diskette drive. Then type A:\SETUP and press Enter.
5. It will prompt you if you want to continue the installation. Click on Yes.
6. It asks where you want to install the drivers. You may accept the default by clicking on Next.
7. After it has finished the installation, it will inform you that it is necessary to exit Windows and reboot the computer. Click on Yes to have the program do this for you automatically, or click on No if you want to reboot the computer at a later time.

The MIDI serial port connector is available when the computer is attached to the Enhanced Port Replicator. The MIDI port capability is disabled as a default, so you need to enable the function with the ThinkPad Features program. You need to install the MPU401 Support Software from the Windows 3.1 Diskette. Select and install the Roland MPU401 device driver in the Control Panel.

TP 380,385,560X changes to the configuration files
The following lines are added to the corresponding configuration file:

DOS Installation

AUTOEXEC.BAT

C:\CRYSTAL\CS32MIX /L=13,13
SET PATH=%PATH%;C:\CRYSTAL;

CONFIG.SYS

DEVICE=C:\CRYSTAL\CS4232C.EXE


Windows Installation

AUTOEXEC.BAT

SET BLASTER = A220 I5 D1 T4
(no changes for the 560X)

CONFIG.SYS

device=c:\crystal\cs4232C.EXE

SYSTEM.INI

[boot]
msmixmgr.dll

[386Enh]
device=vsndsys.386
DMABUFFERSize=36

[drivers]
wave=cs32ba11.drv
aux=cs32ba11.drv
mixer=cs32ba11.drv
midi=csfm.drv

[sndsys.drv]
CS4232Control=538
BinFile=c:\crystal\cwaudio.bin
Duplex=Full
SingleModeDMA=0
Msft Support=1
BlasterSupport=CS4232
OldMSDOSGameIOAddress=220
Default DMA=1
Default I/O=530
Default IRQ=7
IOAddress=530
DMAADC=0
DMADAC=1
Interrupt=5
FMMixer=Line
CDMixer=Aux2
LineMixer=Aux1
UsePnP=1

[csfm.drv]
portFM=388
int=0


TP 770 changes to the configuration files
DOS Installation

AUTOEXEC.BAT

C:\CRYSTAL\CS32MIX /L=13,13
SET PATH=%PATH%;C:\CRYSTAL;

CONFIG.SYS

DEVICE=C:\CRYSTAL\CS4232C.EXE


Windows Installation

AUTOEXEC.BAT

no changes made

CONFIG.SYS

device=c:\crystal\cs4232C.EXE

SYSTEM.INI

[boot]
device=mmsystem.dll msmixmgr.dll

[386Enh]
DMABUFFERSize=36

[drivers]
wave=cs32ba11.drv
aux=cs32ba11.drv
mixer=cs32ba11.drv
midi=csfm.drv

[sndsys.drv]
CS4232Control=538
BinFile=c:\crystal\cwaudio.bin
Duplex=Full
SingleModeDMA=0
Msft Support=1
BlasterSupport=CS4232
OldMSDOSGameIOAddress=220
Default DMA=1
Default I/O=530
Default IRQ=7
IOAddress=52c
DMAADC=0
DMADAC=1
Interrupt=5
FMMixer=Line
CDMixer=Aux2
LineMixer=Aux1
UsePnP=1

[csfm.drv]
portFM=388
int=0

Search Keywords

Hint Category

Audio

Date Created

20-11-97

Last Updated

31-03-98

Revision Date

13-03-99

Brand

IBM ThinkPad

Product Family

ThinkPad 380, ThinkPad 380D, ThinkPad 380E, ThinkPad 380ED, ThinkPad 385D, ThinkPad 385E, ThinkPad 385ED, ThinkPad 560X, ThinkPad 770

Machine Type

2635, 2640, 9548, 9549

Model

Various

TypeModel

Retain Tip (if applicable)

Reverse Doclinks
and Admin Purposes