|
2.565 bytes |
Service Hints & Tips |
Document ID: DETR-3TARR2 |
Aptiva - 2144/2168 (SL-H/I) Type 2 Processor speed settings
Applicable to: World-Wide
Processor Speed Setting - Type H-2, I-2:
When installing a processor, make sure jumper JP3 and JP25 are set to the correct speed as shown below.
|
Processor Speed |
Jumper JP3 |
Default Setting |
|
75MHz, 90MHz, |
1-3 |
X |
|
120MHz,133MHz, |
1-3, 2-4 |
|
Processor Speed |
Jumper JP25 |
Default Setting |
|
75MHz, 90MHz, 100MHz, 120MHz, 133MHz, |
1-2 |
X |
|
150MHz, 166MHz |
2-3 |
Figure 1-5. Processor Speed Setting
|
Search Keywords |
| |
|
Hint Category |
Hardware Installation/Configuration, Processors, Jumper/Switch Settings, System Boards | |
|
Date Created |
04-10-96 | |
|
Last Updated |
23-03-99 | |
|
Revision Date |
23-03-2000 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2144, 2168 | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |