5.359 bytes

Service Hints & Tips

Document ID: GSMH-3AFM7H

IBM PC140 - Supported memory configurations

Applicable to: World-Wide

Memory Configuration (Type 6260)
You can install a maximum of four single in-line memory modules (SIMMs) in the computer.
The system supports a minimum of 8 MB and a maximum of 128 MB of memory. Use only tin lead, 72-pin, 70 ns fast-page mode, non-parity SIMMs.

Memory modules are installed in two memory banks, Bank 0 and Bank 1 (see System Board Layout (Type 6260). Each bank supports 4, 8, 16, or 32 MB single- or double-density SIMMs. Each bank used must contain a pair of SIMMs of the same size and density. For best performance, fill Bank 0 first.

The following table shows some possible SIMM combinations and the total memory size for each combination:

Bank 0

Bank 1

Total

SIMM1

SIMM2

SIMM3

SIMM4

4 MB
(single)

4 MB (single)

8 MB

4 MB (single)

4 MB (single)

4 MB (single)

4 MB (single)

16 MB

8 MB (double)

8 MB (double)

16 MB

8 MB (double)

8 MB (double)

8 MB (double)

8 MB (double)

32 MB

8 MB (double)

8 MB (double)

16 MB (single)

16 MB (single)

48 MB

16 MB (single)

16 MB (single)

32 MB

16 MB (single)

16 MB (single)

16 MB (single)

16 MB (single)

64 MB

32 MB (double)

32 MB (double)

64 MB

32 MB (double)

32 MB (double)

4 MB (single)

4 MB (single)

72 MB

32 MB (double)

32 MB (double)

8 MB (double)

8 MB (double)

80 MB

32 MB (double)

32 MB (double)

16 MB (single)

16 MB (single)

96 MB

32 MB (double)

32 MB (double)

32 MB (double)

32 MB (double)

128 MB



Search Keywords

Hint Category

Hardware Maintenance Information

Date Created

14-05-96

Last Updated

21-04-98

Revision Date

15-04-99

Brand

IBM PC

Product Family

PC 140

Machine Type

6260

Model

Various

TypeModel

Retain Tip (if applicable)

Reverse Doclinks
and Admin Purposes