161.381 bytes

Service Hints & Tips

Document ID: GSMH-3FCCKZ

IBM PC/IBM IntelliStation - Hard disk drive jumper settings

Applicable to: World-Wide

Hard Disk Drive Jumper Settings:
IDE hard disk drives for the PC 300/700 series computers use jumpers to set the drives as primary (master) or secondary (slave).

For SCSI hard disk drives, see SCSI Hard Disk Drive Settings.

Attention:
Refer to the hard disk drive label on the drive, or to the figures below for the hard disk drive settings.



IDE Hard Disk Drive Settings:

1

Primary (Master) Hard Disk Drive

2

Secondary (Slave) Hard Disk Drive


IDE Drives:

SCSI Hard Disk Drive Settings:
540 MB SCSI


1 GB SCSI:

SCSI
ID

Position
A2 A1 A

SCSI
ID

Position
A2 A1 A0

7

On On On

3

Off On On

6

On On Off

2

Off On Off

5

On Off On

1

Off Off On

4

On Off Off

0

Off Off Off


1.12 GB, 2.25 GB SCSI:


2 GB SCSI:


2.1 GB, 4.5 GB SCSI:


Search Keywords

Hint Category

Hardware Maintenance Information

Date Created

20-03-97

Last Updated

18-05-99

Revision Date

26-05-2000

Brand

IBM IntelliStation, IBM PC

Product Family

M Pro, Z Pro, PC 300GL, PC 750, PC 730, PC 365, PC 360, PC 350, PC 340, PC 330, PC 300PL, PC 300XL

Machine Type

6888, 6889, 6898, 6899, 6272, 6282, 6561, 6591, 6562, 6592, 6862, 6892, 6588, 6571, 6573, 6575, 6576, 6577, 6560, 6581, 6583, 6585, 6586, 6587, 6598, 6589, 6875, 6876, 6877, 6885, 6886, 6887, 6284, 6897

Model

All

TypeModel

Retain Tip (if applicable)

Reverse Doclinks
and Admin Purposes